[PATCH v2 1/3] platform/chrome: Update binary interface for EC-based charge control

[Thomas Weißschuh]

The charge-control command v2/v3 is more featureful than v1, it
additionally supports charge thresholds.

The definitions were imported from ChromeOS EC commit
32870d602317 ("squirtle: modify motionsense rotation matrix")

Signed-off-by: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
---
 include/linux/platform_data/cros_ec_commands.h | 49 ++++++++++++++++++++++++--
 1 file changed, 47 insertions(+), 2 deletions(-)

diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
index ecc47d5fe239..c35e534e3c3d 100644
--- a/include/linux/platform_data/cros_ec_commands.h
+++ b/include/linux/platform_data/cros_ec_commands.h
@@ -3809,16 +3809,61 @@ struct ec_params_i2c_write {
  * discharge the battery.
  */
 #define EC_CMD_CHARGE_CONTROL 0x0096
-#define EC_VER_CHARGE_CONTROL 1
+#define EC_VER_CHARGE_CONTROL 3
 
 enum ec_charge_control_mode {
 	CHARGE_CONTROL_NORMAL = 0,
 	CHARGE_CONTROL_IDLE,
 	CHARGE_CONTROL_DISCHARGE,
+	/* Add no more entry below. */
+	CHARGE_CONTROL_COUNT,
+};
+
+#define EC_CHARGE_MODE_TEXT                               \
+	{                                                 \
+		[CHARGE_CONTROL_NORMAL] = "NORMAL",       \
+		[CHARGE_CONTROL_IDLE] = "IDLE",           \
+		[CHARGE_CONTROL_DISCHARGE] = "DISCHARGE", \
+	}
+
+enum ec_charge_control_cmd {
+	EC_CHARGE_CONTROL_CMD_SET = 0,
+	EC_CHARGE_CONTROL_CMD_GET,
+};
+
+enum ec_charge_control_flag {
+	EC_CHARGE_CONTROL_FLAG_NO_IDLE = BIT(0),
 };
 
 struct ec_params_charge_control {
-	uint32_t mode;  /* enum charge_control_mode */
+	uint32_t mode; /* enum charge_control_mode */
+
+	/* Below are the fields added in V2. */
+	uint8_t cmd; /* enum ec_charge_control_cmd. */
+	uint8_t flags; /* enum ec_charge_control_flag (v3+) */
+	/*
+	 * Lower and upper thresholds for battery sustainer. This struct isn't
+	 * named to avoid tainting foreign projects' name spaces.
+	 *
+	 * If charge mode is explicitly set (e.g. DISCHARGE), battery sustainer
+	 * will be disabled. To disable battery sustainer, set mode=NORMAL,
+	 * lower=-1, upper=-1.
+	 */
+	struct {
+		int8_t lower; /* Display SoC in percentage. */
+		int8_t upper; /* Display SoC in percentage. */
+	} sustain_soc;
+} __ec_align4;
+
+/* Added in v2 */
+struct ec_response_charge_control {
+	uint32_t mode; /* enum charge_control_mode */
+	struct { /* Battery sustainer thresholds */
+		int8_t lower;
+		int8_t upper;
+	} sustain_soc;
+	uint8_t flags; /* enum ec_charge_control_flag (v3+) */
+	uint8_t reserved;
 } __ec_align4;
 
 /*****************************************************************************/

-- 
2.45.1