[PATCH v3] ASoc: tas2781: Enable RCA-based playback without DSP firmware download
From: Shenghao Ding
Date: Wed May 29 2024 - 06:37:42 EST
In only RCA(Reconfigurable Architecture) binary case, no DSP program will
be working inside tas2563/tas2781, that is dsp-bypass mode, do not support
speaker protection, and audio acoustic algorithms in this mode.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@xxxxxx>
---
v3:
- Add description on RCA is Reconfigurable Architecture.
- Add the description on enabling
- Reword the commit
- Remove question mark in the comments.
- Add spaces in comments.
v2:
- Correct comment.
- Add Fixes.
- Move header file to the first.
v1:
- Split out the different logical changes into different patches.
- rename tasdevice_dsp_fw_state -> tasdevice_fw_state, the fw are not
only DSP fw, but also RCA(Reconfigurable data, such as acoustic data
and register setting, etc).
- Add TASDEVICE_RCA_FW_OK in tasdevice_fw_state to identify the state
that only RCA binary file has been download successfully, but DSP fw
is not loaded or loading failure.
- Add the this strategy into tasdevice_tuning_switch.
- If one side of the if/else has a braces both should in
tasdevice_tuning_switch.
- Identify whehter both RCA and DSP have been loaded or only RCA has
been loaded in tasdevice_fw_ready.
- Add check fw load status in tasdevice_startup.
- remove ret in tasdevice_startup to make the code neater.
---
include/sound/tas2781-dsp.h | 3 ++-
sound/soc/codecs/tas2781-fmwlib.c | 16 ++++++++++-----
sound/soc/codecs/tas2781-i2c.c | 33 ++++++++++++++++++++-----------
3 files changed, 34 insertions(+), 18 deletions(-)
diff --git a/include/sound/tas2781-dsp.h b/include/sound/tas2781-dsp.h
index 7fba7ea26a4b..92d68ca5eafb 100644
--- a/include/sound/tas2781-dsp.h
+++ b/include/sound/tas2781-dsp.h
@@ -117,10 +117,11 @@ struct tasdevice_fw {
struct device *dev;
};
-enum tasdevice_dsp_fw_state {
+enum tasdevice_fw_state {
TASDEVICE_DSP_FW_NONE = 0,
TASDEVICE_DSP_FW_PENDING,
TASDEVICE_DSP_FW_FAIL,
+ TASDEVICE_RCA_FW_OK,
TASDEVICE_DSP_FW_ALL_OK,
};
diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c
index 265a8ca25cbb..5db1a0ac6036 100644
--- a/sound/soc/codecs/tas2781-fmwlib.c
+++ b/sound/soc/codecs/tas2781-fmwlib.c
@@ -2324,14 +2324,19 @@ void tasdevice_tuning_switch(void *context, int state)
struct tasdevice_fw *tas_fmw = tas_priv->fmw;
int profile_cfg_id = tas_priv->rcabin.profile_cfg_id;
- if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) {
- dev_err(tas_priv->dev, "DSP bin file not loaded\n");
+ /*
+ * Only RCA-based Playback can still work with no dsp program running
+ * inside the chip?
+ */
+ if (!(tas_priv->fw_state == TASDEVICE_RCA_FW_OK ||
+ tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK)) {
+ dev_err(tas_priv->dev, "No firmware loaded\n");
return;
}
if (state == 0) {
- if (tas_priv->cur_prog < tas_fmw->nr_programs) {
- /*dsp mode or tuning mode*/
+ if (tas_fmw && tas_priv->cur_prog < tas_fmw->nr_programs) {
+ /* dsp mode or tuning mode */
profile_cfg_id = tas_priv->rcabin.profile_cfg_id;
tasdevice_select_tuningprm_cfg(tas_priv,
tas_priv->cur_prog, tas_priv->cur_conf,
@@ -2340,9 +2345,10 @@ void tasdevice_tuning_switch(void *context, int state)
tasdevice_select_cfg_blk(tas_priv, profile_cfg_id,
TASDEVICE_BIN_BLK_PRE_POWER_UP);
- } else
+ } else {
tasdevice_select_cfg_blk(tas_priv, profile_cfg_id,
TASDEVICE_BIN_BLK_PRE_SHUTDOWN);
+ }
}
EXPORT_SYMBOL_NS_GPL(tasdevice_tuning_switch,
SND_SOC_TAS2781_FMWLIB);
diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c
index 9350972dfefe..9b85a44511c2 100644
--- a/sound/soc/codecs/tas2781-i2c.c
+++ b/sound/soc/codecs/tas2781-i2c.c
@@ -380,23 +380,33 @@ static void tasdevice_fw_ready(const struct firmware *fmw,
mutex_lock(&tas_priv->codec_lock);
ret = tasdevice_rca_parser(tas_priv, fmw);
- if (ret)
+ if (ret) {
+ tasdevice_config_info_remove(tas_priv);
goto out;
+ }
tasdevice_create_control(tas_priv);
tasdevice_dsp_remove(tas_priv);
tasdevice_calbin_remove(tas_priv);
- tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING;
+ tas_priv->fw_state = TASDEVICE_RCA_FW_OK;
scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin",
tas_priv->dev_name);
+
ret = tasdevice_dsp_parser(tas_priv);
if (ret) {
dev_err(tas_priv->dev, "dspfw load %s error\n",
tas_priv->coef_binaryname);
- tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL;
goto out;
}
- tasdevice_dsp_create_ctrls(tas_priv);
+
+ /*
+ * If no dsp-related kcontrol created, the dsp resource will be freed.
+ */
+ ret = tasdevice_dsp_create_ctrls(tas_priv);
+ if (ret) {
+ dev_err(tas_priv->dev, "dsp controls error\n");
+ goto out;
+ }
tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK;
@@ -417,9 +427,8 @@ static void tasdevice_fw_ready(const struct firmware *fmw,
tasdevice_prmg_load(tas_priv, 0);
tas_priv->cur_prog = 0;
out:
- if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) {
- /*If DSP FW fail, kcontrol won't be created */
- tasdevice_config_info_remove(tas_priv);
+ if (tas_priv->fw_state == TASDEVICE_RCA_FW_OK) {
+ /*If DSP FW fail, DSP kcontrol won't be created */
tasdevice_dsp_remove(tas_priv);
}
mutex_unlock(&tas_priv->codec_lock);
@@ -466,14 +475,14 @@ static int tasdevice_startup(struct snd_pcm_substream *substream,
{
struct snd_soc_component *codec = dai->component;
struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec);
- int ret = 0;
- if (tas_priv->fw_state != TASDEVICE_DSP_FW_ALL_OK) {
- dev_err(tas_priv->dev, "DSP bin file not loaded\n");
- ret = -EINVAL;
+ if (!(tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK ||
+ tas_priv->fw_state == TASDEVICE_RCA_FW_OK)) {
+ dev_err(tas_priv->dev, "Bin file not loaded\n");
+ return -EINVAL;
}
- return ret;
+ return 0;
}
static int tasdevice_hw_params(struct snd_pcm_substream *substream,
--
2.34.1