Re: [PATCH v2 1/2] dt-bindings: hwmon: ti,ina2xx: Add ti,alert-polarity property

From: Conor Dooley
Date: Wed May 29 2024 - 12:17:27 EST


On Wed, May 29, 2024 at 11:47:44AM +0200, Amna Waseem wrote:
> Add a property to the binding to configure the Alert Polarity.
> Alert pin is asserted based on the value of Alert Polarity bit of
> Mask/Enable register. It is by default 0 which means Alert pin is
> configured to be active low open collector. Value of 1 maps to
> Inverted (active high open collector).
>
> Signed-off-by: Amna Waseem <Amna.Waseem@xxxxxxxx>
> ---
> Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
> index df86c2c92037..5a16d2d94587 100644
> --- a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
> @@ -66,6 +66,14 @@ properties:
> description: phandle to the regulator that provides the VS supply typically
> in range from 2.7 V to 5.5 V.
>
> + ti,alert-polarity:
> + description: Alert polarity bit value of Mask/Enable register. Alert pin is
> + asserted based on the value of Alert polarity Bit. Default value is Normal
> + (0 which maps to active-low open collector). The other value is Inverted
> + (1 which maps to active-high open collector).
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]

There's no need for this to have a value, it's sufficient to be a flag
of "ti,alert-active-high". Present would mean active-high and absent
active-low. This has the added benefit the devicetree node being
understandable to a reader.

Thanks,
Conor.

> +
> required:
> - compatible
> - reg
> @@ -88,5 +96,6 @@ examples:
> label = "vdd_3v0";
> shunt-resistor = <1000>;
> vs-supply = <&vdd_3v0>;
> + ti,alert-polarity = <1>;
> };
> };
>
> --
> 2.30.2
>

Attachment: signature.asc
Description: PGP signature