Re: [PATCH net-next] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII

[Russell King (Oracle)]

On Wed, May 29, 2024 at 07:43:15PM +0530, Sneh Shah wrote:
> In this version of qualcomm ethernet, PCS is not an independent HW
> block. It is integrated to MAC block itself. It has very limited
> configuration.Here PCS doesn't have it's own link speed/duplex
> capabities. Hence we are bypassing all this PCS related functionalities.

I want to concentrate on this part first - we'll address the 2.5G
issues separately once I've got a picture of this hardware (and thus
can work out what needs to change in my phylink_pcs implementation to
support the standard Cisco SGMII speeds.

>From what I understand you're saying, your integrated PCS is different
from the DesignWare integrated PCS?

Which core does it use? dwmac4_core.c or dwmac1000_core.c, or some
other? Not knowing which core makes asking the following questions
harder, since I'm having to double them up to cover both cores with
their different definitions.

Does it only present its status via the GMAC_PHYIF_CONTROL_STATUS or
GMAC_RGSMIIIS register?

>From what you're saying:
- if using the dwmac1000 core, then for the registers at GMAC_PCS_BASE
  (0xc0 offset)...
- if using the dwmac4 core, then for registers at GMAC_PCS_BASE
  (0xe0 offset)...
.. is it true that only the GMAC_AN_CTRL() register is implemented
and none of the other registers listed in stmmac_pcs.h?

In terms of interrupts when the link status changes, how do they
present? Are they through the GMAC_INT_RGSMIIS interrupt only?
What about GMAC_INT_PCS_LINK or GMAC_INT_PCS_ANE? Or in the case
of the other core, is it through the PCS_RGSMIIIS_IRQ interrupt
only? Similarly, what about PCS_LINK_IRQ or PCS_ANE_IRQ?

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!