Re: [PATCH 1/1] spi: dt-bindings: fsl-dspi: Convert to yaml format

[Rob Herring (Arm)]

On Wed, 29 May 2024 15:36:50 -0400, Frank Li wrote:
> Convert dt-binding spi-fsl-dspi.txt to yaml format.
> 
> Addtional changes during convert:
> - compatible string "fsl,ls1028a-dspi" can be followed by
> fsl,ls1021a-v1.0-dspi
> - Change "dspi0@4002c000" to "spi@4002c000" in example
> - Reorder properties in example
> - Use GIC include in example
> 
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
> 
> Notes:
>     pass dt_binding_check
> 
>     make dt_binding_check DT_SCHEMA_FILES=fsl,dspi.yaml
>       SCHEMA  Documentation/devicetree/bindings/processed-schema.json
>       CHKDT   Documentation/devicetree/bindings
>       LINT    Documentation/devicetree/bindings
>       DTEX    Documentation/devicetree/bindings/spi/fsl,dspi.example.dts
>       DTC_CHK Documentation/devicetree/bindings/spi/fsl,dspi.example.dtb
> 
>  .../devicetree/bindings/spi/fsl,dspi.yaml     | 126 ++++++++++++++++++
>  .../devicetree/bindings/spi/spi-fsl-dspi.txt  |  65 ---------
>  2 files changed, 126 insertions(+), 65 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/spi/fsl,dspi.yaml
>  delete mode 100644 Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/spi/fsl,dspi.example.dtb: /example-0/spi@4002c000/flash@0: failed to match any schema with compatible: ['atmel,at26df081a']

doc reference errors (make refcheckdocs):
Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
MAINTAINERS: Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240529193651.1029840-1-Frank.Li@xxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.