Re: [PATCH] x86/cpu: Provide default cache line size if not enumerated

[Andy Shevchenko]

On Mon, May 20, 2024 at 01:43:42PM +0300, Andy Shevchenko wrote:
> On Fri, May 17, 2024 at 01:05:34PM -0700, Dave Hansen wrote:
> > 
> > From: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
> > 
> > tl;dr: CPUs with CPUID.80000008H but without CPUID.01H:EDX[CLFSH]
> > will end up reporting cache_line_size()==0 and bad things happen.
> > Fill in a default on those to avoid the problem.
> > 
> > Long Story:
> > 
> > The kernel dies a horrible death if c->x86_cache_alignment (aka.
> > cache_line_size() is 0.  Normally, this value is populated from
> 
> Missing ) ?
> 
> > c->x86_clflush_size.
> > 
> > Right now the code is set up to get c->x86_clflush_size from two
> > places.  First, modern CPUs get it from CPUID.  Old CPUs that don't
> > have leaf 0x80000008 (or CPUID at all) just get some sane defaults
> > from the kernel in get_cpu_address_sizes().
> > 
> > The vast majority of CPUs that have leaf 0x80000008 also get
> > ->x86_clflush_size from CPUID.  But there are oddballs.
> > 
> > Intel Quark CPUs[1] and others[2] have leaf 0x80000008 but don't set
> > CPUID.01H:EDX[CLFSH], so they skip over filling in ->x86_clflush_size:
> > 
> > 	cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
> > 	if (cap0 & (1<<19))
> > 		c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
> > 
> > So they: land in get_cpu_address_sizes(), set vp_bits_from_cpuid=0 and
> > never fill in c->x86_clflush_size, assign c->x86_cache_alignment, and
> > hilarity ensues in code like:
> > 
> >         buffer = kzalloc(ALIGN(sizeof(*buffer), cache_line_size()),
> >                          GFP_KERNEL);
> > 
> > To fix this, always provide a sane value for ->x86_clflush_size.
> > 
> > Big thanks to Andy Shevchenko for finding and reporting this and also
> > providing a first pass at a fix. But his fix was only partial and only
> > worked on the Quark CPUs.  It would not, for instance, have worked on
> > the QEMU config.
> > 
> > 1. https://raw.githubusercontent.com/InstLatx64/InstLatx64/master/GenuineIntel/GenuineIntel0000590_Clanton_03_CPUID.txt
> > 2. You can also get this behavior if you use "-cpu 486,+clzero"
> >    in QEMU.
> 
> Tested-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> 
> (as this obviously fixes the issue as it makes a partial revert of the culprit
>  change).

What's the status of this? (It seems you have to rebase it on top of the
existing patches in the same area).

-- 
With Best Regards,
Andy Shevchenko