[PATCH v3 02/15] pinctrl: renesas: pinctrl-rzg2l: Rename B0WI to BOWI

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Fix the typo B0WI -> BOWI to match with the RZ/G2L HW manual.

Reported-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v2->v3
- New patch
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index f784169abf11..169986022a73 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -131,7 +131,7 @@
 #define PVDD_1800		1	/* I/O domain voltage <= 1.8V */
 #define PVDD_3300		0	/* I/O domain voltage >= 3.3V */
 
-#define PWPR_B0WI		BIT(7)	/* Bit Write Disable */
+#define PWPR_BOWI		BIT(7)	/* Bit Write Disable */
 #define PWPR_PFCWE		BIT(6)	/* PFC Register Write Enable */
 
 #define PM_MASK			0x03
@@ -478,8 +478,8 @@ static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
 	writeb(reg & ~BIT(pin), pctrl->base + PMC(off));
 
 	/* Set the PWPR register to allow PFC register to write */
-	writel(0x0, pctrl->base + regs->pwpr);		/* B0WI=0, PFCWE=0 */
-	writel(PWPR_PFCWE, pctrl->base + regs->pwpr);	/* B0WI=0, PFCWE=1 */
+	writel(0x0, pctrl->base + regs->pwpr);		/* BOWI=0, PFCWE=0 */
+	writel(PWPR_PFCWE, pctrl->base + regs->pwpr);	/* BOWI=0, PFCWE=1 */
 
 	/* Select Pin function mode with PFC register */
 	reg = readl(pctrl->base + PFC(off));
@@ -487,8 +487,8 @@ static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
 	writel(reg | (func << (pin * 4)), pctrl->base + PFC(off));
 
 	/* Set the PWPR register to be write-protected */
-	writel(0x0, pctrl->base + regs->pwpr);		/* B0WI=0, PFCWE=0 */
-	writel(PWPR_B0WI, pctrl->base + regs->pwpr);	/* B0WI=1, PFCWE=0 */
+	writel(0x0, pctrl->base + regs->pwpr);		/* BOWI=0, PFCWE=0 */
+	writel(PWPR_BOWI, pctrl->base + regs->pwpr);	/* BOWI=1, PFCWE=0 */
 
 	/* Switch to Peripheral pin function with PMC register */
 	reg = readb(pctrl->base + PMC(off));
@@ -2520,8 +2520,8 @@ static void rzg2l_pinctrl_pm_setup_pfc(struct rzg2l_pinctrl *pctrl)
 	const struct rzg2l_register_offsets *regs = &hwcfg->regs;
 
 	/* Set the PWPR register to allow PFC register to write. */
-	writel(0x0, pctrl->base + regs->pwpr);		/* B0WI=0, PFCWE=0 */
-	writel(PWPR_PFCWE, pctrl->base + regs->pwpr);	/* B0WI=0, PFCWE=1 */
+	writel(0x0, pctrl->base + regs->pwpr);		/* BOWI=0, PFCWE=0 */
+	writel(PWPR_PFCWE, pctrl->base + regs->pwpr);	/* BOWI=0, PFCWE=1 */
 
 	/* Restore port registers. */
 	for (u32 port = 0; port < nports; port++) {
@@ -2565,8 +2565,8 @@ static void rzg2l_pinctrl_pm_setup_pfc(struct rzg2l_pinctrl *pctrl)
 	}
 
 	/* Set the PWPR register to be write-protected. */
-	writel(0x0, pctrl->base + regs->pwpr);		/* B0WI=0, PFCWE=0 */
-	writel(PWPR_B0WI, pctrl->base + regs->pwpr);	/* B0WI=1, PFCWE=0 */
+	writel(0x0, pctrl->base + regs->pwpr);		/* BOWI=0, PFCWE=0 */
+	writel(PWPR_BOWI, pctrl->base + regs->pwpr);	/* BOWI=1, PFCWE=0 */
 }
 
 static int rzg2l_pinctrl_suspend_noirq(struct device *dev)
-- 
2.34.1