Re: [PATCH v2 2/3] hwmon: Add support for SPD5118 compliant temperature sensors

[Guenter Roeck]

On 5/30/24 15:39, Guenter Roeck wrote:
> Add support for SPD5118 (Jedec JESD300-5B.01) compliant temperature
> sensors. Such sensors are typically found on DDR5 memory modules.
>
> The first patch of the series adds SPD5118 devicetree bindings. The second
> patch adds support for SPD5118 temperature sensors. The third patch adds
> support for suspend/resume.
>
> Note: The driver introduced with this patch series does not currently
> support accessing the SPD5118 EEPROM, or accessing SPD5118 compatible chips
> in I3C mode.
>
> v2: Drop PEC support; it only applies to I3C mode.
>      Update documentation
>      Add suspend/resume support
>
> ----------------------------------------------------------------
> Guenter Roeck (3):
>        dt-bindings: hwmon: jedec,spd5118: Add bindings
>        hwmon: Add support for SPD5118 compliant temperature sensors
>        hwmon: (spd5118) Add suspend/resume support
>
>   .../devicetree/bindings/hwmon/jedec,spd5118.yaml   |  48 ++
>   Documentation/hwmon/index.rst                      |   1 +
>   Documentation/hwmon/spd5118.rst                    |  56 +++
>   drivers/hwmon/Kconfig                              |  12 +
>   drivers/hwmon/Makefile                             |   1 +
>   drivers/hwmon/spd5118.c                            | 510 +++++++++++++++++++++
>   6 files changed, 628 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/hwmon/jedec,spd5118.yaml
>   create mode 100644 Documentation/hwmon/spd5118.rst
>   create mode 100644 drivers/hwmon/spd5118.c

Obviously this should have been patch 0/3. Sory.

Guenter