[PATCH v3 3/3] hwmon: g672: add support for g761

From: Christian Marangi
Date: Thu May 30 2024 - 20:47:30 EST


Add support for g761 PWM Fan Controller.

The g761 is a copy of the g763 with the only difference of supporting
and internal clock. The internal clock is used if no clocks property is
defined in device node and in such case the required bit is enabled and
clock handling is skipped.

The internal clock oscillator runs at 31KHz.

Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
Changes v2:
- Rework handling of internal clock

drivers/hwmon/g762.c | 33 ++++++++++++++++++++++++++++++---
1 file changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/g762.c b/drivers/hwmon/g762.c
index af1228708e25..a00cf3245eec 100644
--- a/drivers/hwmon/g762.c
+++ b/drivers/hwmon/g762.c
@@ -69,6 +69,7 @@ enum g762_regs {
#define G762_REG_FAN_CMD1_PWM_POLARITY 0x02 /* PWM polarity */
#define G762_REG_FAN_CMD1_PULSE_PER_REV 0x01 /* pulse per fan revolution */

+#define G761_REG_FAN_CMD2_FAN_CLOCK 0x20 /* choose internal clock*/
#define G762_REG_FAN_CMD2_GEAR_MODE_1 0x08 /* fan gear mode */
#define G762_REG_FAN_CMD2_GEAR_MODE_0 0x04
#define G762_REG_FAN_CMD2_FAN_STARTV_1 0x02 /* fan startup voltage */
@@ -115,6 +116,7 @@ enum g762_regs {

struct g762_data {
struct i2c_client *client;
+ bool internal_clock;
struct clk *clk;

/* update mutex */
@@ -566,6 +568,7 @@ static int do_set_fan_startv(struct device *dev, unsigned long val)

#ifdef CONFIG_OF
static const struct of_device_id g762_dt_match[] = {
+ { .compatible = "gmt,g761" },
{ .compatible = "gmt,g762" },
{ .compatible = "gmt,g763" },
{ },
@@ -597,6 +600,21 @@ static int g762_of_clock_enable(struct i2c_client *client)
if (!client->dev.of_node)
return 0;

+ data = i2c_get_clientdata(client);
+
+ /*
+ * Skip CLK detection and handling if we use internal clock.
+ * This is only valid for g761.
+ */
+ data->internal_clock = of_device_is_compatible(client->dev.of_node,
+ "gmt,g761") &&
+ !of_property_present(client->dev.of_node,
+ "clocks");
+ if (data->internal_clock) {
+ do_set_clk_freq(&client->dev, 32768);
+ return 0;
+ }
+
clk = of_clk_get(client->dev.of_node, 0);
if (IS_ERR(clk)) {
dev_err(&client->dev, "failed to get clock\n");
@@ -616,7 +634,6 @@ static int g762_of_clock_enable(struct i2c_client *client)
goto clk_unprep;
}

- data = i2c_get_clientdata(client);
data->clk = clk;

ret = devm_add_action(&client->dev, g762_of_clock_disable, data);
@@ -1025,16 +1042,26 @@ ATTRIBUTE_GROUPS(g762);
static inline int g762_fan_init(struct device *dev)
{
struct g762_data *data = g762_update_client(dev);
+ int ret;

if (IS_ERR(data))
return PTR_ERR(data);

+ /* internal_clock can only be set with compatible g761 */
+ if (data->internal_clock)
+ data->fan_cmd2 |= G761_REG_FAN_CMD2_FAN_CLOCK;
+
data->fan_cmd1 |= G762_REG_FAN_CMD1_DET_FAN_FAIL;
data->fan_cmd1 |= G762_REG_FAN_CMD1_DET_FAN_OOC;
data->valid = false;

- return i2c_smbus_write_byte_data(data->client, G762_REG_FAN_CMD1,
- data->fan_cmd1);
+ ret = i2c_smbus_write_byte_data(data->client, G762_REG_FAN_CMD1,
+ data->fan_cmd1);
+ if (ret)
+ return ret;
+
+ return i2c_smbus_write_byte_data(data->client, G762_REG_FAN_CMD2,
+ data->fan_cmd2);
}

static int g762_probe(struct i2c_client *client)
--
2.43.0