Re: [PATCH v2 0/4] Add overlays to disable optional hardware in k3-am6xx-phycore-som boards

[Wadim Egorov]

Am 29.05.24 um 00:51 schrieb Nathan Morrisson:
> Add three overlays to disable the eth phy, rtc, and spi nor. These
> overlays will be used to disable device tree nodes for components
> that are optionally not populated.
>
> v2:
>    - Add build time tests in makefile

For the whole series,

Reviewed-by: Wadim Egorov <w.egorov@xxxxxxxxx>

> Nathan Morrisson (4):
>    arm64: dts: ti: k3-am64-phycore-som: Add serial_flash label
>    arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable eth phy
>    arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable rtc
>    arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disabl spi nor
>
>   arch/arm64/boot/dts/ti/Makefile               | 17 +++++++++++++++++
>   .../boot/dts/ti/k3-am64-phycore-som.dtsi      |  2 +-
>   .../ti/k3-am6xx-phycore-disable-eth-phy.dtso  | 19 +++++++++++++++++++
>   .../dts/ti/k3-am6xx-phycore-disable-rtc.dtso  | 15 +++++++++++++++
>   .../ti/k3-am6xx-phycore-disable-spi-nor.dtso  | 15 +++++++++++++++
>   5 files changed, 67 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-rtc.dtso
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-spi-nor.dtso