Re: [PATCH v3 1/1] dt-bindings: iio: adc: add a7779 doc

[Krzysztof Kozlowski]

On 31/05/2024 15:35, Ramona Alexandra Nechita wrote:
> Add dt bindings for adc ad7779.
> 
> Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
> ---
>  .../ABI/testing/sysfs-bus-iio-adc-ad777x      | 23 +++++
>  .../bindings/iio/adc/adi,ad7779.yaml          | 87 +++++++++++++++++++
>  2 files changed, 110 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad777x
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml

Why is this sent separately troubles us all... I saw many patches from
analog.com, so maybe there is a person who will help you, in case you do
not want to read submitting patches?

..

> +
> +  reg:
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  spi-max-frequency: true

Drop

> +
> +  clocks:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  vref-supply:
> +    description:
> +      ADC reference voltage supply
> +
> +  start-gpios:
> +    description:
> +      Pin that controls start synchronization pulse.
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        adc@0 {
> +          compatible = "adi,ad7779";

Messed indentation. Keep same for entire example, e.g.
Use 4 spaces for example indentation.

Best regards,
Krzysztof