[PATCH 3/3] arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add PMIC and charger

[Raymond Hackley]

The phones listed below have Richtek RT5033 PMIC and charger.
Add them to the device trees.
- Samsung Galaxy Core Prime LTE
- Samsung Galaxy Grand Prime

Cc: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
Signed-off-by: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
---
 .../dts/qcom/msm8216-samsung-fortuna3g.dts    |  6 +++
 .../qcom/msm8916-samsung-fortuna-common.dtsi  | 47 +++++++++++++++++++
 .../dts/qcom/msm8916-samsung-gprimeltecan.dts | 41 ++++++++++++++++
 .../qcom/msm8916-samsung-grandprimelte.dts    |  6 +++
 .../boot/dts/qcom/msm8916-samsung-rossa.dts   |  6 +++
 5 files changed, 106 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts
index e7f6df229f9a..fba68bf8bf79 100644
--- a/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts
+++ b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts
@@ -10,6 +10,12 @@ / {
 	chassis-type = "handset";
 };
 
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1000000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
 &st_accel {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
index b5b7beab2209..81b3e0760154 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
@@ -27,6 +27,12 @@ tz-apps@85a00000 {
 		};
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		precharge-current-microamp = <450000>;
+		precharge-upper-limit-microvolt = <3500000>;
+	};
+
 	clk_pwm_backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&clk_pwm 0 100000>;
@@ -234,6 +240,8 @@ fuel-gauge@35 {
 
 		pinctrl-0 = <&fg_alert_default>;
 		pinctrl-names = "default";
+
+		power-supplies = <&charger>;
 	};
 };
 
@@ -259,6 +267,38 @@ touchscreen: touchscreen@20 {
 
 &blsp_i2c6 {
 	status = "okay";
+
+	pmic@34 {
+		compatible = "richtek,rt5033";
+		reg = <0x34>;
+
+		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+
+		regulators {
+			rt5033_reg_safe_ldo: SAFE_LDO {
+				regulator-min-microvolt = <4900000>;
+				regulator-max-microvolt = <4900000>;
+				regulator-always-on;
+			};
+
+			/*
+			 * Needed for camera, but not used yet.
+			 * Define empty nodes to allow disabling the unused
+			 * regulators.
+			 */
+			LDO {};
+			BUCK {};
+		};
+
+		charger: charger {
+			compatible = "richtek,rt5033-charger";
+			monitored-battery = <&battery>;
+			richtek,usb-connector = <&usb_con>;
+		};
+	};
 };
 
 &blsp_uart2 {
@@ -403,6 +443,13 @@ nfc_i2c_default: nfc-i2c-default-state {
 		bias-disable;
 	};
 
+	pmic_int_default: pmic-int-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	sdc2_cd_default: sdc2-cd-default-state {
 		pins = "gpio38";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts
index 589dd006a746..677e4e286ac0 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts
@@ -21,6 +21,12 @@ tz-apps@85500000 {
 	};
 };
 
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1000000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
 &bosch_accel {
 	status = "okay";
 };
@@ -30,6 +36,9 @@ &bosch_magn {
 };
 
 &blsp_i2c6 {
+	/* pmic@34 is on i2c_nfc instead */
+	/delete-node/ pmic@34;
+
 	nfc@27 {
 		compatible = "samsung,s3fwrn5-i2c";
 		reg = <0x27>;
@@ -48,6 +57,38 @@ nfc@27 {
 
 &i2c_nfc {
 	/* nfc@27 is on &blsp_i2c6 */
+
+	pmic@34 {
+		compatible = "richtek,rt5033";
+		reg = <0x34>;
+
+		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+
+		regulators {
+			rt5033_reg_safe_ldo: SAFE_LDO {
+				regulator-min-microvolt = <4900000>;
+				regulator-max-microvolt = <4900000>;
+				regulator-always-on;
+			};
+
+			/*
+			 * Needed for camera, but not used yet.
+			 * Define empty nodes to allow disabling the unused
+			 * regulators.
+			 */
+			LDO {};
+			BUCK {};
+		};
+
+		charger: charger {
+			compatible = "richtek,rt5033-charger";
+			monitored-battery = <&battery>;
+			richtek,usb-connector = <&usb_con>;
+		};
+	};
 };
 
 &mpss_mem {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts
index cffad734c4df..582bfcb09684 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts
@@ -10,6 +10,12 @@ / {
 	chassis-type = "handset";
 };
 
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1000000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
 &bosch_accel {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts
index ebaa13c6b016..1981bb71f6a9 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts
@@ -10,6 +10,12 @@ / {
 	chassis-type = "handset";
 };
 
+&battery {
+	charge-term-current-microamp = <150000>;
+	constant-charge-current-max-microamp = <700000>;
+	constant-charge-voltage-max-microvolt = <4400000>;
+};
+
 &mpss_mem {
 	/* Firmware for rossa needs more space */
 	reg = <0x0 0x86800000 0x0 0x5800000>;
-- 
2.39.2