Re: [PATCH net,v2] ice: avoid IRQ collision to fix init failure on ACPI S3 resume

From: Simon Horman
Date: Sat Jun 01 2024 - 09:17:34 EST


On Thu, May 30, 2024 at 10:21:31PM +0800, Ricky Wu wrote:
> A bug in https://bugzilla.kernel.org/show_bug.cgi?id=218906 describes
> that irdma would break and report hardware initialization failed after
> suspend/resume with Intel E810 NIC (tested on 6.9.0-rc5).
>
> The problem is caused due to the collision between the irq numbers
> requested in irdma and the irq numbers requested in other drivers
> after suspend/resume.
>
> The irq numbers used by irdma are derived from ice's ice_pf->msix_entries
> which stores mappings between MSI-X index and Linux interrupt number.
> It's supposed to be cleaned up when suspend and rebuilt in resume but
> it's not, causing irdma using the old irq numbers stored in the old
> ice_pf->msix_entries to request_irq() when resume. And eventually
> collide with other drivers.
>
> This patch fixes this problem. On suspend, we call ice_deinit_rdma() to
> clean up the ice_pf->msix_entries (and free the MSI-X vectors used by
> irdma if we've dynamically allocated them). On resume, we call
> ice_init_rdma() to rebuild the ice_pf->msix_entries (and allocate the
> MSI-X vectors if we would like to dynamically allocate them).
>
> Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA")
> Tested-by: Cyrus Lien <cyrus.lien@xxxxxxxxxxxxx>
> Signed-off-by: Ricky Wu <en-wei.wu@xxxxxxxxxxxxx>
> ---
> Changes in v2:
> - Change title
> - Add Fixes and Tested-by tags
> - Fix typo
> ---
> drivers/net/ethernet/intel/ice/ice_main.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
> index f60c022f7960..ec3cbadaa162 100644
> --- a/drivers/net/ethernet/intel/ice/ice_main.c
> +++ b/drivers/net/ethernet/intel/ice/ice_main.c
> @@ -5544,7 +5544,7 @@ static int ice_suspend(struct device *dev)
> */
> disabled = ice_service_task_stop(pf);
>
> - ice_unplug_aux_dev(pf);
> + ice_deinit_rdma(pf);
>
> /* Already suspended?, then there is nothing to do */
> if (test_and_set_bit(ICE_SUSPENDED, pf->state)) {
> @@ -5624,6 +5624,10 @@ static int ice_resume(struct device *dev)
> if (ret)
> dev_err(dev, "Cannot restore interrupt scheme: %d\n", ret);
>
> + ret = ice_init_rdma(pf);
> + if (ret)
> + dev_err(dev, "Reinitialize RDMA during resume failed: %d\n", ret);
> +

nit: The line above could trivially be wrapped to fit within 80 columns,
as is preferred for Networking code.

Flagged by checkpatch.pl --max-line-length=80

> clear_bit(ICE_DOWN, pf->state);
> /* Now perform PF reset and rebuild */
> reset_type = ICE_RESET_PFR;
> --
> 2.43.0
>
>