[PATCH v3 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml

From: Kim Seer Paller
Date: Sun Jun 02 2024 - 21:24:06 EST


Add documentation for ltc2672.

Reported-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
Closes: https://lore.kernel.org/all/171643825573.1037396.2749703571529285460.robh@xxxxxxxxxx/
Co-developed-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
Signed-off-by: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
---
.../bindings/iio/dac/adi,ltc2672.yaml | 158 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 159 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml

diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml
new file mode 100644
index 000000000000..d143a9db7010
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2672.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2672 DAC
+
+maintainers:
+ - Michael Hennerich <michael.hennerich@xxxxxxxxxx>
+ - Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
+
+description: |
+ Analog Devices LTC2672 5 channel, 16 bit, 300mA DAC
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2672.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ltc2672
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 50000000
+
+ vcc-supply:
+ description: Analog Supply Voltage Input.
+
+ v-neg-supply:
+ description: Negative Supply Voltage Input.
+
+ vdd0-supply:
+ description: Positive Supply Voltage Input for DAC OUT0.
+
+ vdd1-supply:
+ description: Positive Supply Voltage Input for DAC OUT1.
+
+ vdd2-supply:
+ description: Positive Supply Voltage Input for DAC OUT2.
+
+ vdd3-supply:
+ description: Positive Supply Voltage Input for DAC OUT3.
+
+ vdd4-supply:
+ description: Positive Supply Voltage Input for DAC OUT4.
+
+ iovcc-supply:
+ description: Digital Input/Output Supply Voltage.
+
+ ref-supply:
+ description:
+ Reference Input/Output. The voltage at the REF pin sets the full-scale
+ range of all channels. If not provided the internal reference is used and
+ also provided on the VREF pin.
+
+ reset-gpios:
+ description:
+ Active Low Asynchronous Clear Input. A logic low at this level triggered
+ input clears the device to the default reset code and output range, which
+ is zero-scale with the outputs off. The control registers are cleared to
+ zero.
+ maxItems: 1
+
+ adi,rfsadj-ohms:
+ description:
+ If FSADJ is tied to VCC, an internal RFSADJ (20 kΩ) is selected, which
+ results in nominal output ranges. When an external resistor of 19 kΩ to
+ 41 kΩ can be used instead by connecting the resistor between FSADJ and GND
+ it controls the scaling of the ranges, and the internal resistor is
+ automatically disconnected.
+ minimum: 19000
+ maximum: 41000
+ default: 20000
+
+ io-channels:
+ description:
+ ADC channel to monitor voltages and currents at the MUX pin.
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^channel@[0-4]$":
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ description: The channel number representing the DAC output channel.
+ maximum: 4
+
+ adi,toggle-mode:
+ description:
+ Set the channel as a toggle enabled channel. Toggle operation enables
+ fast switching of a DAC output between two different DAC codes without
+ any SPI transaction.
+ type: boolean
+
+ adi,output-range-microamp:
+ description: Specify the channel output full scale range.
+ enum: [3125000, 6250000, 12500000, 25000000, 50000000, 100000000,
+ 200000000, 300000000]
+
+ required:
+ - reg
+ - adi,output-range-microamp
+
+required:
+ - compatible
+ - reg
+ - spi-max-frequency
+ - vcc-supply
+ - iovcc-supply
+ - v-neg-supply
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+additionalProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dac@0 {
+ compatible = "adi,ltc2672";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ vcc-supply = <&vcc>;
+ iovcc-supply = <&vcc>;
+ ref-supply = <&vref>;
+ v-neg-supply = <&vneg>;
+
+ io-channels = <&adc 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@0 {
+ reg = <0>;
+ adi,toggle-mode;
+ adi,output-range-microamp = <3125000>;
+ };
+
+ channel@1 {
+ reg = <1>;
+ adi,output-range-microamp = <6250000>;
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index c7a102d7fd6a..ac1e29e26f31 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13070,6 +13070,7 @@ L: linux-iio@xxxxxxxxxxxxxxx
S: Supported
W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
+F: Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml

LTC2688 IIO DAC DRIVER
M: Nuno Sá <nuno.sa@xxxxxxxxxx>
--
2.34.1