Re: [PATCH v1 1/1] Bluetooth: btnxpuart: Add handling for boot-signature timeout errors

From: Paul Menzel
Date: Mon Jun 03 2024 - 03:09:30 EST


Dear Neeraj,


Am 03.06.24 um 08:37 schrieb Neeraj Sanjay Kale:
This handles the timeout errors seen in the bootloader signatures during
FW download.

Please add the error to the commit message.

When the bootloader does not receive a response packet from the host
within a specific time, it adds an error code to the bootloader
signature while requesting for the FW chunk from the same offset.

The host is expected to clear this error code with a NAK, and reply to
only those bootloader signatures which have error code 0.

This error handling is valid for data_req bootloader signatures for V3
and future bootloader versions.

Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>

Add a Fixes: tag?

---
drivers/bluetooth/btnxpuart.c | 46 ++++++++++++++++++++++++++++++++---
1 file changed, 42 insertions(+), 4 deletions(-)

diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index 0b93c2ff29e4..2018513fb961 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -187,6 +187,10 @@ struct btnxpuart_dev {
#define NXP_NAK_V3 0x7b
#define NXP_CRC_ERROR_V3 0x7c
+#define NXP_ACK_RX_TIMEOUT 0x0002
+#define NXP_HDR_RX_TIMEOUT 0x0003
+#define NXP_DATA_RX_TIMEOUT 0x0004
+

Please mention the datasheet name, revision and section in the commit message for review.

#define HDR_LEN 16
#define NXP_RECV_CHIP_VER_V1 \
@@ -277,6 +281,12 @@ struct nxp_bootloader_cmd {
__be32 crc;
} __packed;
+struct nxp_v3_rx_timeout_nak {
+ u8 nak;
+ __le32 offset;
+ u8 crc;
+} __packed;
+
static u8 crc8_table[CRC8_TABLE_SIZE];
/* Default configurations */
@@ -899,6 +909,32 @@ static int nxp_recv_chip_ver_v3(struct hci_dev *hdev, struct sk_buff *skb)
return 0;
}
+static void nxp_handle_fw_dnld_error(struct hci_dev *hdev, struct v3_data_req *req)

I would not use abbreviations, and use download.

+{
+ struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev);
+ __u32 offset = __le32_to_cpu(req->offset);
+ __u16 err = __le16_to_cpu(req->error);
+ struct nxp_v3_rx_timeout_nak nak_tx_buf;
+
+ switch (err) {
+ case NXP_ACK_RX_TIMEOUT:
+ case NXP_HDR_RX_TIMEOUT:
+ case NXP_DATA_RX_TIMEOUT:
+ nak_tx_buf.nak = NXP_NAK_V3;
+ nak_tx_buf.offset = __cpu_to_le32(offset);
+ nak_tx_buf.crc = crc8(crc8_table, (u8 *)&nak_tx_buf,

Can the cast be avoided and written differently?

+ sizeof(nak_tx_buf) - 1, 0xff);
+ serdev_device_write_buf(nxpdev->serdev, (u8 *)&nak_tx_buf,
+ sizeof(nak_tx_buf));
+ break;
+ default:
+ bt_dev_dbg(hdev, "Unknown bootloader error: %d", err);
+ break;
+
+ }
+
+}
+
static int nxp_recv_fw_req_v3(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev);
@@ -913,7 +949,12 @@ static int nxp_recv_fw_req_v3(struct hci_dev *hdev, struct sk_buff *skb)
if (!req || !nxpdev->fw)
goto free_skb;
- nxp_send_ack(NXP_ACK_V3, hdev);
+ if (!req->error) {
+ nxp_send_ack(NXP_ACK_V3, hdev);
+ } else {
+ nxp_handle_fw_dnld_error(hdev, req);
+ goto free_skb;
+ }
len = __le16_to_cpu(req->len);
@@ -940,9 +981,6 @@ static int nxp_recv_fw_req_v3(struct hci_dev *hdev, struct sk_buff *skb)
wake_up_interruptible(&nxpdev->fw_dnld_done_wait_q);
goto free_skb;
}
- if (req->error)
- bt_dev_dbg(hdev, "FW Download received err 0x%02x from chip",
- req->error);
offset = __le32_to_cpu(req->offset);
if (offset < nxpdev->fw_v3_offset_correction) {


Kind regards,

Paul