Re: [PATCH net-next v5 4/5] net: phy: mediatek: Extend 1G TX/RX link pulse time

[Russell King (Oracle)]

On Mon, Jun 03, 2024 at 03:15:36AM +0000, SkyLake Huang (黃啟澤) wrote:
> On Thu, 2024-05-30 at 17:10 +0100, Russell King (Oracle) wrote:
> >  	 
> > External email : Please do not click links or open attachments until
> > you have verified the sender or the content.
> >  On Thu, May 30, 2024 at 04:01:08PM +0000, SkyLake Huang (黃啟澤) wrote:
> > > I'm not going to handle timeout case here. If we can't detect
> > > MTK_PHY_FINAL_SPEED_1000 in 1 second, let it go and we'll detect it
> > > next round.
> > 
> > With this waiting up to one second for MTK_PHY_FINAL_SPEED_1000 to be
> > set...
> > 
> > > > > +int mtk_gphy_cl22_read_status(struct phy_device *phydev)
> > > > > +{
> > > > > +int ret;
> > > > > +
> > > > > +ret = genphy_read_status(phydev);
> > > > > +if (ret)
> > > > > +return ret;
> > > > > +
> > > > > +if (phydev->autoneg == AUTONEG_ENABLE && !phydev-
> > > > >autoneg_complete) {
> > 
> > Are you sure you want this condition like this? When the link is
> > down,
> > and 1G speeds are being advertised, it means that you'll call
> > extend_an_new_lp_cnt_limit(). If MTK_PHY_FINAL_SPEED_1000 doesn't get
> > set, that'll take one second each and every time we poll the PHY for
> > its status - which will be done while holding phydev->lock.
> > 
> > This doesn't sound very good.
> > 
> > -- 
> > RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> > FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
> 
> I add another condition to make sure we enter
> extend_an_new_lp_cnt_limit() only in first few seconds when we plug in
> cable.
> 
> It will look like this:
> ===============================================================
> #define MTK_PHY_AUX_CTRL_AND_STATUS		0x14
> #define   MTK_PHY_LP_DETECTED_MASK		GENMASK(7, 6)
> 
> if (phydev->autoneg == AUTONEG_ENABLE && !phydev->autoneg_complete) {
> 	phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_1);
> 	ret = __phy_read(phydev, MTK_PHY_AUX_CTRL_AND_STATUS);
> 	phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);

We provide a helper for this:

	ret = phy_read_paged(phydev, MTK_PHY_PAGE_EXTENDED_1,
			     MTK_PHY_AUX_CTRL_AND_STATUS);

but please check "ret" for errors.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!