[PATCH v2 1/2] dt-bindings: usb: gpio-sbu-mux: Make 'enable-gpios' optional

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>

The enable gpio is not required when the SBU mux is used only for
orientation, make enable-gpios required only for alternate mode
switch use case.

Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
---
v2:
 - add Acked-by: Conor Dooley
---
 Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
index 88e1607cf053..30edcce82f97 100644
--- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
+++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
@@ -44,13 +44,18 @@ properties:
 
 required:
   - compatible
-  - enable-gpios
   - select-gpios
   - orientation-switch
   - port
 
 allOf:
   - $ref: usb-switch.yaml#
+  - if:
+      required:
+        - mode-switch
+    then:
+      required:
+        - enable-gpios
 
 additionalProperties: false
 
-- 
2.39.2