[PATCH v3 00/11] Series to deliver Ethernet for STM32MP13

[Christophe Roullier]

STM32MP13 is STM32 SOC with 2 GMACs instances
    GMAC IP version is SNPS 4.20.
    GMAC IP configure with 1 RX and 1 TX queue.
    DMA HW capability register supported
    RX Checksum Offload Engine supported
    TX Checksum insertion supported
    Wake-Up On Lan supported
    TSO supported
Rework dwmac glue to simplify management for next stm32 (integrate RFC from Marek)

V2: - Remark from Rob Herring (add Krzysztof's ack in patch 02/11, update in yaml)
      Remark from Serge Semin (upate commits msg)
V3: - Remove PHY regulator patch and Ethernet2 DT because need to clarify how to
      manage PHY regulator (in glue or PHY side)
    - Integrate RFC from Marek
    - Remark from Rob Herring in YAML documentation

Christophe Roullier (6):
  dt-bindings: net: add STM32MP13 compatible in documentation for stm32
  net: ethernet: stmmac: add management of stm32mp13 for stm32
  ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
  ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board
  ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board
  ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support

Marek Vasut (5):
  net: stmmac: dwmac-stm32: Separate out external clock rate validation
  net: stmmac: dwmac-stm32: Separate out external clock selector
  net: stmmac: dwmac-stm32: Extract PMCR configuration
  net: stmmac: dwmac-stm32: Clean up the debug prints
  net: stmmac: dwmac-stm32: Fix Mhz to MHz

 .../devicetree/bindings/net/stm32-dwmac.yaml  |  41 +++-
 arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi   |  71 +++++++
 arch/arm/boot/dts/st/stm32mp131.dtsi          |  31 +++
 arch/arm/boot/dts/st/stm32mp133.dtsi          |  30 +++
 arch/arm/boot/dts/st/stm32mp135f-dk.dts       |  24 +++
 arch/arm/configs/multi_v7_defconfig           |   1 +
 .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 176 ++++++++++++++----
 7 files changed, 327 insertions(+), 47 deletions(-)

-- 
2.25.1