Re: [PATCH v4] thermal: k3_j72xx_bandgap: implement suspend/resume support

[Daniel Lezcano]

On 25/04/2024 17:32, Thomas Richard wrote:
> From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
>
> This add suspend-to-ram support.
>
> The derived_table is kept-as is, so the resume is only about
> pm_runtime_* calls and restoring the same registers as the probe.
>
> Extract the hardware initialization procedure to a function called at
> both probe-time & resume-time.
>
> The probe-time loop is split in two to ensure doing the hardware
> initialization before registering thermal zones. That ensures our
> callbacks cannot be called while in bad state.
>
> The 100ms delay in the hardware initialization sequence was removed.
> It was initially added to be sure the thresholds are programmed before
> enabling the interrupt, but in fact it's not needed (tested on J7200
> platform).
>
> Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
> Acked-by: Keerthy <j-keerthy@xxxxxx>
> Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx>
> ---

Applied, sorry for the delay

--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog