[PATCH v1] arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin

[max . oss . 09]

From: Max Krummenacher <max.krummenacher@xxxxxxxxxxx>

SODIMM 17 can be used as an edge triggered interrupt supplied from an
off board source.

Enable hysteresis on the pinmuxing to increase immunity against noise
on the signal.

Fixes: 60f01b5b5c7d ("arm64: dts: imx8mm-verdin: update iomux configuration")
Signed-off-by: Max Krummenacher <max.krummenacher@xxxxxxxxxxx>

---

 arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 4768b05fd765..7a971b235283 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -935,7 +935,7 @@ pinctrl_gpio8: gpio8grp {
 	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
 	pinctrl_gpio_9_dsi: gpio9dsigrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x146>;	/* SODIMM 17 */
+			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x1c6>;	/* SODIMM 17 */
 	};
 
 	/* Verdin GPIO_10_DSI (pulled-up as active-low) */
-- 
2.42.0