[PATCH V5 4/5] arm64: dts: qcom: x1e80100: Add cpucp mailbox and sram nodes

[Sibi Sankar]

Add the cpucp mailbox and sram nodes required by SCMI perf protocol
on X1E80100 SoCs.

Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/x1e80100.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index a537f3117c9d..df31ca0f497c 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -5105,6 +5105,13 @@ gic_its: msi-controller@17040000 {
 			};
 		};
 
+		cpucp_mbox: mailbox@17430000 {
+			compatible = "qcom,x1e80100-cpucp-mbox";
+			reg = <0 0x17430000 0 0x10000>, <0 0x18830000 0 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
 		apps_rsc: rsc@17500000 {
 			compatible = "qcom,rpmh-rsc";
 			reg = <0 0x17500000 0 0x10000>,
@@ -5288,6 +5295,25 @@ frame@1780d000 {
 			};
 		};
 
+		sram: sram@18b4e000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0x18b4e000 0x0 0x400>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x18b4e000 0x400>;
+
+			cpu_scp_lpri0: scp-sram-section@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0x0 0x200>;
+			};
+
+			cpu_scp_lpri1: scp-sram-section@200 {
+				compatible = "arm,scmi-shmem";
+				reg = <0x200 0x200>;
+			};
+		};
+
 		system-cache-controller@25000000 {
 			compatible = "qcom,x1e80100-llcc";
 			reg = <0 0x25000000 0 0x200000>,
-- 
2.34.1