[PATCH v2 1/1] mmc: sdhci-brcmstb: check R1_STATUS for erase/trim/discard

[Kamal Dasu]

When erase/trim/discard completion was converted to mmc_poll_for_busy(),
optional ->card_busy() host ops support was added as part of
dd0d84c3e6a5b2 ("mmc: core: Convert to mmc_poll_for_busy() for erase/trim/discard").
sdhci card->busy() could return busy for long periods to cause
mmc_do_erase() to block during discard operation as shown below
during mkfs.f2fs :

    Info: [/dev/mmcblk1p9] Discarding device
    [   39.597258] sysrq: Show Blocked State
    [   39.601183] task:mkfs.f2fs       state:D stack:0     pid:1561  tgid:1561  ppid:1542   flags:0x0000000d
    [   39.610609] Call trace:
    [   39.613098]  __switch_to+0xd8/0xf4
    [   39.616582]  __schedule+0x440/0x4f4
    [   39.620137]  schedule+0x2c/0x48
    [   39.623341]  schedule_hrtimeout_range_clock+0xe0/0x114
    [   39.628562]  schedule_hrtimeout_range+0x10/0x18
    [   39.633169]  usleep_range_state+0x5c/0x90
    [   39.637253]  __mmc_poll_for_busy+0xec/0x128
    [   39.641514]  mmc_poll_for_busy+0x48/0x70
    [   39.645511]  mmc_do_erase+0x1ec/0x210
    [   39.649237]  mmc_erase+0x1b4/0x1d4
    [   39.652701]  mmc_blk_mq_issue_rq+0x35c/0x6ac
    [   39.657037]  mmc_mq_queue_rq+0x18c/0x214
    [   39.661022]  blk_mq_dispatch_rq_list+0x3a8/0x528
    [   39.665722]  __blk_mq_sched_dispatch_requests+0x3a0/0x4ac
    [   39.671198]  blk_mq_sched_dispatch_requests+0x28/0x5c
    [   39.676322]  blk_mq_run_hw_queue+0x11c/0x12c
    [   39.680668]  blk_mq_flush_plug_list+0x200/0x33c
    [   39.685278]  blk_add_rq_to_plug+0x68/0xd8
    [   39.689365]  blk_mq_submit_bio+0x3a4/0x458
    [   39.693539]  __submit_bio+0x1c/0x80
    [   39.697096]  submit_bio_noacct_nocheck+0x94/0x174
    [   39.701875]  submit_bio_noacct+0x1b0/0x22c
    [   39.706042]  submit_bio+0xac/0xe8
    [   39.709424]  blk_next_bio+0x4c/0x5c
    [   39.712973]  blkdev_issue_secure_erase+0x118/0x170
    [   39.717835]  blkdev_common_ioctl+0x374/0x728
    [   39.722175]  blkdev_ioctl+0x8c/0x2b0
    [   39.725816]  vfs_ioctl+0x24/0x40
    [   39.729117]  __arm64_sys_ioctl+0x5c/0x8c
    [   39.733114]  invoke_syscall+0x68/0xec
    [   39.736839]  el0_svc_common.constprop.0+0x70/0xd8
    [   39.741609]  do_el0_svc+0x18/0x20
    [   39.744981]  el0_svc+0x68/0x94
    [   39.748107]  el0t_64_sync_handler+0x88/0x124
    [   39.752455]  el0t_64_sync+0x168/0x16c

This problem is obsereved with BLKSECDISCARD ioctl on brcmstb mmc
controllers. Fix makes mmc_host_ops.card_busy NULL and forces
MMC_SEND_STATUS and R1_STATUS check in mmc_busy_cb() function.

Signed-off-by: Kamal Dasu <kamal.dasu@xxxxxxxxxxxx>
---
 drivers/mmc/host/sdhci-brcmstb.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
index 9053526fa212..150fb477b7cc 100644
--- a/drivers/mmc/host/sdhci-brcmstb.c
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -24,6 +24,7 @@
 #define BRCMSTB_MATCH_FLAGS_NO_64BIT		BIT(0)
 #define BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT	BIT(1)
 #define BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE	BIT(2)
+#define BRCMSTB_MATCH_FLAGS_USE_CARD_BUSY	BIT(4)
 
 #define BRCMSTB_PRIV_FLAGS_HAS_CQE		BIT(0)
 #define BRCMSTB_PRIV_FLAGS_GATE_CLOCK		BIT(1)
@@ -384,6 +385,9 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
 	if (match_priv->flags & BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT)
 		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
 
+	if (!(match_priv->flags & BRCMSTB_MATCH_FLAGS_USE_CARD_BUSY))
+		host->mmc_host_ops.card_busy = NULL;
+
 	/* Change the base clock frequency if the DT property exists */
 	if (device_property_read_u32(&pdev->dev, "clock-frequency",
 				     &priv->base_freq_hz) != 0)
-- 
2.17.1

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature