[PATCH] drm/fbdev-dma: fix getting smem_start
From: Peng Fan (OSS)
Date: Tue Jun 04 2024 - 03:55:00 EST
From: Peng Fan <peng.fan@xxxxxxx>
If 'info->screen_buffer' locates in vmalloc address space, virt_to_page
will not be able to get correct results. With CONFIG_DEBUG_VM and
CONFIG_DEBUG_VIRTUAL enabled on ARM64, there is dump below:
[ 3.536043] ------------[ cut here ]------------
[ 3.540716] virt_to_phys used for non-linear address: 000000007fc4f540 (0xffff800086001000)
[ 3.552628] WARNING: CPU: 4 PID: 61 at arch/arm64/mm/physaddr.c:12 __virt_to_phys+0x68/0x98
[ 3.565455] Modules linked in:
[ 3.568525] CPU: 4 PID: 61 Comm: kworker/u12:5 Not tainted 6.6.23-06226-g4986cc3e1b75-dirty #250
[ 3.577310] Hardware name: NXP i.MX95 19X19 board (DT)
[ 3.582452] Workqueue: events_unbound deferred_probe_work_func
[ 3.588291] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3.595233] pc : __virt_to_phys+0x68/0x98
[ 3.599246] lr : __virt_to_phys+0x68/0x98
[ 3.603276] sp : ffff800083603990
[ 3.677939] Call trace:
[ 3.680393] __virt_to_phys+0x68/0x98
[ 3.684067] drm_fbdev_dma_helper_fb_probe+0x138/0x238
[ 3.689214] __drm_fb_helper_initial_config_and_unlock+0x2b0/0x4c0
[ 3.695385] drm_fb_helper_initial_config+0x4c/0x68
[ 3.700264] drm_fbdev_dma_client_hotplug+0x8c/0xe0
[ 3.705161] drm_client_register+0x60/0xb0
[ 3.709269] drm_fbdev_dma_setup+0x94/0x148
So add a check 'is_vmalloc_addr'.
Fixes: b79fe9abd58b ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers")
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
drivers/gpu/drm/drm_fbdev_dma.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_fbdev_dma.c b/drivers/gpu/drm/drm_fbdev_dma.c
index 6c9427bb4053..9e2eddb6eb5c 100644
--- a/drivers/gpu/drm/drm_fbdev_dma.c
+++ b/drivers/gpu/drm/drm_fbdev_dma.c
@@ -130,7 +130,12 @@ static int drm_fbdev_dma_helper_fb_probe(struct drm_fb_helper *fb_helper,
info->flags |= FBINFO_READS_FAST; /* signal caching */
info->screen_size = sizes->surface_height * fb->pitches[0];
info->screen_buffer = map.vaddr;
- info->fix.smem_start = page_to_phys(virt_to_page(info->screen_buffer));
+
+ if (is_vmalloc_addr(info->screen_buffer))
+ info->fix.smem_start = page_to_phys(vmalloc_to_page(info->screen_buffer));
+ else
+ info->fix.smem_start = page_to_phys(virt_to_page(info->screen_buffer));
+
info->fix.smem_len = info->screen_size;
return 0;
--
2.37.1