Re: [PATCH v4 3/5] drm/mipi-dbi: Make bits per word configurable for pixel transfers

[Dmitry Baryshkov]

On Tue, Jun 04, 2024 at 03:20:30PM +0200, Noralf Trønnes via B4 Relay wrote:
> From: Noralf Trønnes <noralf@xxxxxxxxxxx>
> 
> MIPI DCS write/set commands have 8 bit parameters except for the
> write_memory commands where it depends on the pixel format.
> drm_mipi_dbi does currently only support RGB565 which is 16-bit and it
> has to make sure that the pixels enters the SPI bus in big endian format
> since the MIPI DBI spec doesn't have support for little endian.
> 
> drm_mipi_dbi is optimized for DBI interface option 3 which means that the
> 16-bit bytes are swapped by the upper layer if the SPI bus does not
> support 16 bits per word, signified by the swap_bytes member.
> 
> In order to support both 16-bit and 24-bit pixel transfers we need a way
> to tell the DBI command layer the format of the buffer. Add a
> write_memory_bpw member that the upper layer can use to tell how many
> bits per word to use for the SPI transfer.
> 
> v4:
> - Expand the commit message (Dmitry)
> 
> Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx>
> ---
>  drivers/gpu/drm/drm_mipi_dbi.c | 14 ++++++++++----
>  include/drm/drm_mipi_dbi.h     |  5 +++++
>  2 files changed, 15 insertions(+), 4 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>


-- 
With best wishes
Dmitry