Re: [PATCH v4 07/11] net: ethernet: stmmac: add management of stm32mp13 for stm32
From: kernel test robot
Date: Tue Jun 04 2024 - 15:01:23 EST
Hi Christophe,
kernel test robot noticed the following build warnings:
[auto build test WARNING on cd0057ad75116bacf16fea82e48c1db642971136]
url: https://github.com/intel-lab-lkp/linux/commits/Christophe-Roullier/dt-bindings-net-add-STM32MP13-compatible-in-documentation-for-stm32/20240604-224324
base: cd0057ad75116bacf16fea82e48c1db642971136
patch link: https://lore.kernel.org/r/20240604143502.154463-8-christophe.roullier%40foss.st.com
patch subject: [PATCH v4 07/11] net: ethernet: stmmac: add management of stm32mp13 for stm32
config: arm-defconfig (https://download.01.org/0day-ci/archive/20240605/202406050248.rGgTkevY-lkp@xxxxxxxxx/config)
compiler: clang version 14.0.6 (https://github.com/llvm/llvm-project f28c006a5895fc0e329fe15fead81e37457cb1d1)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240605/202406050248.rGgTkevY-lkp@xxxxxxxxx/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@xxxxxxxxx>
| Closes: https://lore.kernel.org/oe-kbuild-all/202406050248.rGgTkevY-lkp@xxxxxxxxx/
All warnings (new ones prefixed by >>):
>> drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c:239:4: warning: variable 'val' is uninitialized when used here [-Wuninitialized]
val |= SYSCFG_PMCR_ETH_SEL_MII;
^~~
drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c:228:9: note: initialize the variable 'val' to silence this warning
int val;
^
= 0
1 warning generated.
vim +/val +239 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
223
224 static int stm32mp1_configure_pmcr(struct plat_stmmacenet_data *plat_dat)
225 {
226 struct stm32_dwmac *dwmac = plat_dat->bsp_priv;
227 u32 reg = dwmac->mode_reg;
228 int val;
229
230 switch (plat_dat->mac_interface) {
231 case PHY_INTERFACE_MODE_MII:
232 /*
233 * STM32MP15xx supports both MII and GMII, STM32MP13xx MII only.
234 * SYSCFG_PMCSETR ETH_SELMII is present only on STM32MP15xx and
235 * acts as a selector between 0:GMII and 1:MII. As STM32MP13xx
236 * supports only MII, ETH_SELMII is not present.
237 */
238 if (!dwmac->is_mp13) /* Select MII mode on STM32MP15xx */
> 239 val |= SYSCFG_PMCR_ETH_SEL_MII;
240 break;
241 case PHY_INTERFACE_MODE_GMII:
242 val = SYSCFG_PMCR_ETH_SEL_GMII;
243 if (dwmac->enable_eth_ck)
244 val |= SYSCFG_PMCR_ETH_CLK_SEL;
245 break;
246 case PHY_INTERFACE_MODE_RMII:
247 val = SYSCFG_PMCR_ETH_SEL_RMII;
248 if (dwmac->enable_eth_ck)
249 val |= SYSCFG_PMCR_ETH_REF_CLK_SEL;
250 break;
251 case PHY_INTERFACE_MODE_RGMII:
252 case PHY_INTERFACE_MODE_RGMII_ID:
253 case PHY_INTERFACE_MODE_RGMII_RXID:
254 case PHY_INTERFACE_MODE_RGMII_TXID:
255 val = SYSCFG_PMCR_ETH_SEL_RGMII;
256 if (dwmac->enable_eth_ck)
257 val |= SYSCFG_PMCR_ETH_CLK_SEL;
258 break;
259 default:
260 dev_err(dwmac->dev, "Mode %s not supported",
261 phy_modes(plat_dat->mac_interface));
262 /* Do not manage others interfaces */
263 return -EINVAL;
264 }
265
266 dev_dbg(dwmac->dev, "Mode %s", phy_modes(plat_dat->mac_interface));
267
268 /* Shift value at correct ethernet MAC offset in SYSCFG_PMCSETR */
269 val <<= ffs(dwmac->mode_mask) - ffs(SYSCFG_MP1_ETH_MASK);
270
271 /* Need to update PMCCLRR (clear register) */
272 regmap_write(dwmac->regmap, dwmac->ops->syscfg_clr_off,
273 dwmac->mode_mask);
274
275 /* Update PMCSETR (set register) */
276 return regmap_update_bits(dwmac->regmap, reg,
277 dwmac->mode_mask, val);
278 }
279
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki