Re: [PATCH] ata: pata_buddha: pata_gayle: consolidate .sff_data_xfer around libata::ata_sff_data_xfer()

[Sergey Shtylyov]

Hello!

  Please do 2 separate patches (for each driver), or at last name the
patch s/th like "ata: pata_{buddha,gayle}: consolidate .sff_data_xfer around libata-sff.c::ata_sff_data_xfer()"...

On 6/4/24 7:22 PM, Paolo Pisati wrote:

> pata_buddha_data_xfer(), pata_gayle_data_xfer() and ata_sff_data_xfer() are the
> same function, consolidate around libata::ata_sff_data_xfer().
> 
> Signed-off-by: Paolo Pisati <p.pisati@xxxxxxxxx>
> ---
>  drivers/ata/pata_buddha.c | 40 ++-------------------------------------
>  drivers/ata/pata_gayle.c  | 40 ++-------------------------------------
>  2 files changed, 4 insertions(+), 76 deletions(-)
> 
> diff --git a/drivers/ata/pata_buddha.c b/drivers/ata/pata_buddha.c
> index c36ee991d5e5..234278eb26e1 100644
> --- a/drivers/ata/pata_buddha.c
> +++ b/drivers/ata/pata_buddha.c
> @@ -60,42 +60,6 @@ static const struct scsi_host_template pata_buddha_sht = {
>  	ATA_PIO_SHT(DRV_NAME),
>  };
>  
> -/* FIXME: is this needed? */
> -static unsigned int pata_buddha_data_xfer(struct ata_queued_cmd *qc,
> -					 unsigned char *buf,
> -					 unsigned int buflen, int rw)
> -{
> -	struct ata_device *dev = qc->dev;
> -	struct ata_port *ap = dev->link->ap;
> -	void __iomem *data_addr = ap->ioaddr.data_addr;
> -	unsigned int words = buflen >> 1;
> -
> -	/* Transfer multiple of 2 bytes */
> -	if (rw == READ)
> -		raw_insw((u16 *)data_addr, (u16 *)buf, words);
> -	else
> -		raw_outsw((u16 *)data_addr, (u16 *)buf, words);

   Hm, are you sure these calls are equivalent to io{read,write}16_rep()?

> -
> -	/* Transfer trailing byte, if any. */
> -	if (unlikely(buflen & 0x01)) {
> -		unsigned char pad[2] = { };
> -
> -		/* Point buf to the tail of buffer */
> -		buf += buflen - 1;
> -
> -		if (rw == READ) {
> -			raw_insw((u16 *)data_addr, (u16 *)pad, 1);
> -			*buf = pad[0];
> -		} else {
> -			pad[0] = *buf;
> -			raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
> -		}
> -		words++;
> -	}
> -
> -	return words << 1;
> -}
> -
>  /*
>   * Provide our own set_mode() as we don't want to change anything that has
>   * already been configured..
> @@ -131,7 +95,7 @@ static void pata_xsurf_irq_clear(struct ata_port *ap)
>  
>  static struct ata_port_operations pata_buddha_ops = {
>  	.inherits	= &ata_sff_port_ops,
> -	.sff_data_xfer	= pata_buddha_data_xfer,
> +	.sff_data_xfer	= ata_sff_data_xfer,

   There should be no need -- this method is preperly init'ed in ata_sff_port_ops...

>  	.sff_irq_check	= pata_buddha_irq_check,
>  	.cable_detect	= ata_cable_unknown,
>  	.set_mode	= pata_buddha_set_mode,
> @@ -139,7 +103,7 @@ static struct ata_port_operations pata_buddha_ops = {
>  
>  static struct ata_port_operations pata_xsurf_ops = {
>  	.inherits	= &ata_sff_port_ops,
> -	.sff_data_xfer	= pata_buddha_data_xfer,
> +	.sff_data_xfer	= ata_sff_data_xfer,

   Here as well...

>  	.sff_irq_check	= pata_buddha_irq_check,
>  	.sff_irq_clear	= pata_xsurf_irq_clear,
>  	.cable_detect	= ata_cable_unknown,
> diff --git a/drivers/ata/pata_gayle.c b/drivers/ata/pata_gayle.c
> index 3bdbe2b65a2b..febffc36a18f 100644
> --- a/drivers/ata/pata_gayle.c
> +++ b/drivers/ata/pata_gayle.c
> @@ -38,42 +38,6 @@ static const struct scsi_host_template pata_gayle_sht = {
>  	ATA_PIO_SHT(DRV_NAME),
>  };
>  
> -/* FIXME: is this needed? */
> -static unsigned int pata_gayle_data_xfer(struct ata_queued_cmd *qc,
> -					 unsigned char *buf,
> -					 unsigned int buflen, int rw)
> -{
> -	struct ata_device *dev = qc->dev;
> -	struct ata_port *ap = dev->link->ap;
> -	void __iomem *data_addr = ap->ioaddr.data_addr;
> -	unsigned int words = buflen >> 1;
> -
> -	/* Transfer multiple of 2 bytes */
> -	if (rw == READ)
> -		raw_insw((u16 *)data_addr, (u16 *)buf, words);
> -	else
> -		raw_outsw((u16 *)data_addr, (u16 *)buf, words);
> -
> -	/* Transfer trailing byte, if any. */
> -	if (unlikely(buflen & 0x01)) {
> -		unsigned char pad[2] = { };
> -
> -		/* Point buf to the tail of buffer */
> -		buf += buflen - 1;
> -
> -		if (rw == READ) {
> -			raw_insw((u16 *)data_addr, (u16 *)pad, 1);
> -			*buf = pad[0];
> -		} else {
> -			pad[0] = *buf;
> -			raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
> -		}
> -		words++;
> -	}
> -
> -	return words << 1;
> -}
> -

   Same question as above here...

>  /*
>   * Provide our own set_mode() as we don't want to change anything that has
>   * already been configured..
> @@ -110,7 +74,7 @@ static void pata_gayle_irq_clear(struct ata_port *ap)
>  
>  static struct ata_port_operations pata_gayle_a1200_ops = {
>  	.inherits	= &ata_sff_port_ops,
> -	.sff_data_xfer	= pata_gayle_data_xfer,
> +	.sff_data_xfer	= ata_sff_data_xfer,
>  	.sff_irq_check	= pata_gayle_irq_check,
>  	.sff_irq_clear	= pata_gayle_irq_clear,
>  	.cable_detect	= ata_cable_unknown,
> @@ -119,7 +83,7 @@ static struct ata_port_operations pata_gayle_a1200_ops = {
>  
>  static struct ata_port_operations pata_gayle_a4000_ops = {
>  	.inherits	= &ata_sff_port_ops,
> -	.sff_data_xfer	= pata_gayle_data_xfer,
> +	.sff_data_xfer	= ata_sff_data_xfer,
>  	.cable_detect	= ata_cable_unknown,
>  	.set_mode	= pata_gayle_set_mode,
>  };
> 

    Same comments as to pata_buddha.c here...

MBR, Sergey