[PATCH v3 0/6] Add driver for ENS160 sensor

From: Gustavo Silva
Date: Tue Jun 04 2024 - 18:58:08 EST


This series of patches adds a driver for ScioSense ENS160 multi-gas
sensor, designed for indoor air quality monitoring.

---
Changes in v3:
- Add missing `$ref: /schemas/spi/spi-peripheral-props.yaml#` in
devicetree binding
- Move the devm_add_action_or_reset() call to right after setting the
operation mode to standard
- Remove "_spi" and "_i2c" suffixes from device name
- Add a comment explaining what data the mutex is protecting
- Format register address macro

Link to v2: https://lore.kernel.org/linux-iio/20240529001504.33648-1-gustavograzs@xxxxxxxxx/

---
Gustavo Silva (6):
dt-bindings: vendor-prefixes: add ScioSense
dt-bindings: iio: chemical: add ENS160 sensor
iio: chemical: add driver for ENS160 sensor
iio: chemical: ens160: add triggered buffer support
iio: chemical: ens160: add power management support
MAINTAINERS: Add ScioSense ENS160

.../iio/chemical/sciosense,ens160.yaml | 70 ++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 8 +
drivers/iio/chemical/Kconfig | 22 ++
drivers/iio/chemical/Makefile | 3 +
drivers/iio/chemical/ens160.h | 10 +
drivers/iio/chemical/ens160_core.c | 367 ++++++++++++++++++
drivers/iio/chemical/ens160_i2c.c | 62 +++
drivers/iio/chemical/ens160_spi.c | 61 +++
9 files changed, 605 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/chemical/sciosense,ens160.yaml
create mode 100644 drivers/iio/chemical/ens160.h
create mode 100644 drivers/iio/chemical/ens160_core.c
create mode 100644 drivers/iio/chemical/ens160_i2c.c
create mode 100644 drivers/iio/chemical/ens160_spi.c


base-commit: 084eeee1d8da6b4712719264b01cb27b41307f54
--
2.45.1