Re: [PATCH v8 16/17] PCI/pwrctl: add a PCI power control driver for power sequenced devices

[Bjorn Helgaas]

On Wed, Jun 05, 2024 at 02:34:52AM +0300, Dmitry Baryshkov wrote:
> On Wed, 5 Jun 2024 at 02:23, Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> >
> > On Tue, May 28, 2024 at 09:03:24PM +0200, Bartosz Golaszewski wrote:
> > > From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> > >
> > > Add a PCI power control driver that's capable of correctly powering up
> > > devices using the power sequencing subsystem. The first users of this
> > > driver are the ath11k module on QCA6390 and ath12k on WCN7850.

> > > +static const struct of_device_id pci_pwrctl_pwrseq_of_match[] = {
> > > +     {
> > > +             /* ATH11K in QCA6390 package. */
> > > +             .compatible = "pci17cb,1101",
> > > +             .data = "wlan",
> > > +     },
> > > +     {
> > > +             /* ATH12K in WCN7850 package. */
> > > +             .compatible = "pci17cb,1107",
> > > +             .data = "wlan",
> > > +     },
> >
> > IIUC, "pci17cb,1101" and "pci17cb,1107" exist partly so we can check
> > that a DTS conforms to the schema, e.g., a "pci17cb,1101" node
> > contains all the required regulators.  For that use, we obviously need
> > a very specific "compatible" string.
> >
> > Is there any opportunity to add a more generic "compatible" string in
> > addition to those so this list doesn't have to be updated for every
> > PMU?  The .data here is "wlan" in both cases, and for this purpose, we
> > don't care whether it's "pci17cb,1101" or "pci17cb,1107".
> 
> These two devices have different set of regulators and different
> requirements to power them on.

Right, but I don't think pci_pwrctl_pwrseq_probe() knows about those
different sets.  It basically looks like:

  pci_pwrctl_pwrseq_probe(struct platform_device *pdev)
  {
    struct pci_pwrctl_pwrseq_data *data;
    struct device *dev = &pdev->dev;

    data->pwrseq = devm_pwrseq_get(dev, of_device_get_match_data(dev));
    pwrseq_power_on(data->pwrseq);
    data->ctx.dev = dev;
    devm_pci_pwrctl_device_set_ready(dev, &data->ctx);
  }

I think of_device_get_match_data(dev) will return "wlan" for both
"pci17cb,1101" and "pci17cb,1107", so devm_pwrseq_get(),
pwrseq_power_on(), and devm_pci_pwrctl_device_set_ready() don't see
the distinction between them.

Of course, they also get "dev", so they can find the device-specifc
stuff that way, but I think that's on the drivers/power/sequencing/
side, not in this pci-pwrctl-pwrseq driver itself.

So what if there were a more generic "compatible" string, e.g., if the
DT contained something like this:

  wifi@0 {
    compatible = "pci17cb,1101", "wlan-pwrseq";
    ...
  }

and pci_pwrctl_pwrseq_of_match[] had this:

  { .compatible = "wlan-pwrseq", .data = "wlan", }

Wouldn't this pci-pwrctl-pwrseq driver work the same?  I'm not a DT
whiz, so likely I'm missing something, but it would be nice if we
didn't have to update this very generic-looking driver to add every
device that needs it.

Bjorn