Re: [PATCH v2 2/3] dt-bindings: iio: adc: ad7192: Fix clock config

From: Nuno Sá
Date: Wed Jun 05 2024 - 04:28:16 EST


On Wed, 2024-06-05 at 10:51 +0300, Alisa-Dariana Roman wrote:
> There are actually 4 configuration modes of clock source for AD719X
> devices. Either a crystal can be attached externally between MCLK1 and
> MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
> pin. The other 2 modes make use of the 4.92MHz internal clock, which can
> be made available on the MCLK2 pin.
>
> The presence of an external clock is optional, not required.
>
> Fixes: f7356e47032c ("dt-bindings: iio: adc: ad7192: Add binding documentation
> for AD7192")
> Signed-off-by: Alisa-Dariana Roman <alisa.roman@xxxxxxxxxx>
> ---
>  .../bindings/iio/adc/adi,ad7192.yaml          | 19 ++++++++++---------
>  1 file changed, 10 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> index a03da9489ed9..c5a4219a9388 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> @@ -39,11 +39,16 @@ properties:
>  
>    clocks:
>      maxItems: 1
> -    description: phandle to the master clock (mclk)
> +    description: |
> +      Optionally, either a crystal can be attached externally between MCLK1
> and
> +      MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
> +      pin. If absent, internal 4.92MHz clock is used which can be made
> available
> +      on MCLK2.
>  
>    clock-names:
> -    items:
> -      - const: mclk
> +    enum:
> +      - xtal
> +      - clk

Not sure about changing the name of the clock... Isn't this breaking ABI?

- Nuno Sá