Re: [PATCH v2 1/3] dt-bindings: i2c: gpio: Add 'transition-delay-us' property

[Bastien Curutchet]

Hi Rob, Hi Peter,

On 6/3/24 17:58, Rob Herring wrote:
> On Wed, May 29, 2024 at 02:13:37PM +0200, Peter Rosin wrote:
> > Hi!
> >
> > 2024-05-29 at 11:17, Bastien Curutchet wrote:
> > > I2C MUXes described by the i2c-gpio-mux sometimes need a significant
> > > amount of time to switch from a bus to another. When a new bus is
> > > selected, the first I2C transfer can fail if it occurs too early. There
> > > is no way to describe this transition delay that has to be waited before
> > > starting the first I2C transfer.
> > >
> > > Add a 'transition-delay-us' property that indicates the delay to be
> > > respected before doing the first i2c transfer.
> >
> > The io-channel-mux has a property with very similar intent named
> > settle-time-us [1]. I think we should use the same name here.
> >
> > [1] Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml
>
> Agreed. I knew we had something and went looking... I only checked the
> base mux and i2c mux bindings.

Ok I'll do this in V3, thank you.

Best regards
Bastien