[PATCH net-next v12 09/13] net: ethtool: plca: Target the command to the requested PHY

[Maxime Chevallier]

PLCA is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.

Signed-off-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
---
 net/ethtool/plca.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c
index b1e2e3b5027f..43b31a4a164e 100644
--- a/net/ethtool/plca.c
+++ b/net/ethtool/plca.c
@@ -25,7 +25,7 @@ struct plca_reply_data {
 
 const struct nla_policy ethnl_plca_get_cfg_policy[] = {
 	[ETHTOOL_A_PLCA_HEADER]		=
-		NLA_POLICY_NESTED(ethnl_header_policy),
+		NLA_POLICY_NESTED(ethnl_header_policy_phy),
 };
 
 static void plca_update_sint(int *dst, struct nlattr **tb, u32 attrid,
@@ -61,7 +61,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev) {
+	if (!req_base->phydev) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
@@ -80,7 +80,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
 	memset(&data->plca_cfg, 0xff,
 	       sizeof_field(struct plca_reply_data, plca_cfg));
 
-	ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg);
+	ret = ops->get_plca_cfg(req_base->phydev, &data->plca_cfg);
 	ethnl_ops_complete(dev);
 
 out:
@@ -129,7 +129,7 @@ static int plca_get_cfg_fill_reply(struct sk_buff *skb,
 
 const struct nla_policy ethnl_plca_set_cfg_policy[] = {
 	[ETHTOOL_A_PLCA_HEADER]		=
-		NLA_POLICY_NESTED(ethnl_header_policy),
+		NLA_POLICY_NESTED(ethnl_header_policy_phy),
 	[ETHTOOL_A_PLCA_ENABLED]	= NLA_POLICY_MAX(NLA_U8, 1),
 	[ETHTOOL_A_PLCA_NODE_ID]	= NLA_POLICY_MAX(NLA_U32, 255),
 	[ETHTOOL_A_PLCA_NODE_CNT]	= NLA_POLICY_RANGE(NLA_U32, 1, 255),
@@ -141,7 +141,6 @@ const struct nla_policy ethnl_plca_set_cfg_policy[] = {
 static int
 ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	const struct ethtool_phy_ops *ops;
 	struct nlattr **tb = info->attrs;
 	struct phy_plca_cfg plca_cfg;
@@ -149,7 +148,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev)
+	if (!req_info->phydev)
 		return -EOPNOTSUPP;
 
 	ops = ethtool_phy_ops;
@@ -168,7 +167,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 	if (!mod)
 		return 0;
 
-	ret = ops->set_plca_cfg(dev->phydev, &plca_cfg, info->extack);
+	ret = ops->set_plca_cfg(req_info->phydev, &plca_cfg, info->extack);
 	return ret < 0 ? ret : 1;
 }
 
@@ -191,7 +190,7 @@ const struct ethnl_request_ops ethnl_plca_cfg_request_ops = {
 
 const struct nla_policy ethnl_plca_get_status_policy[] = {
 	[ETHTOOL_A_PLCA_HEADER]		=
-		NLA_POLICY_NESTED(ethnl_header_policy),
+		NLA_POLICY_NESTED(ethnl_header_policy_phy),
 };
 
 static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
@@ -204,7 +203,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev) {
+	if (!req_base->phydev) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
@@ -223,7 +222,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
 	memset(&data->plca_st, 0xff,
 	       sizeof_field(struct plca_reply_data, plca_st));
 
-	ret = ops->get_plca_status(dev->phydev, &data->plca_st);
+	ret = ops->get_plca_status(req_base->phydev, &data->plca_st);
 	ethnl_ops_complete(dev);
 out:
 	return ret;
-- 
2.45.1