Re: [PATCH v3 02/15] pinctrl: renesas: pinctrl-rzg2l: Rename B0WI to BOWI

[Lad, Prabhakar]

Hi Geert,

Thank you for the review.

On Wed, Jun 5, 2024 at 12:39 PM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar,
>
> On Thu, May 30, 2024 at 7:41 PM Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> >
> > Fix the typo B0WI -> BOWI to match with the RZ/G2L HW manual.
> >
> > Reported-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> > v2->v3
> > - New patch
>
> Thanks for your patch!
>
> I had a deeper look, as the name "B0WI" (with zero) is also present
> in drivers/pinctrl/renesas/pinctrl-rza2.c, and because Section 41.4.2
> ("Operation for Peripheral Function") in the RZ/G2L Group Hardware
> User's Manual does talk about the "B0WI" (with zero) bit.
>
> Apparently Rev. 0.51 of the RZ/A2M Group Hardware User's Manual used
> both variants. Later (Rev. 1.00) revisions replaced the O-based
> variant by the zero-based variant. So it looks like "B0WI" (with
> zero) is correct, and the RZ/G2L, RZ/V2L, RZ/G2UL, and RZ/Five HW
> manuals should be fixed instead. The RZ/G3S manual already uses
> the correct naming.
>
Ok I'll drop this patch and create a request with the HW manual team
to correct it.

Cheers,
Prabhakar