[PATCH v3 5/5] arm64: dts: qcom: sa8775p-ride: enable remoteprocs

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

Enable all remoteproc nodes on the sa8775p-ride board and point to the
appropriate firmware files.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 26ad05bd3b3f..071fcaf09364 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -727,6 +727,31 @@ &pcie1_phy {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/sa8775p/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp0 {
+	firmware-name = "qcom/sa8775p/cdsp0.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp1 {
+	firmware-name = "qcom/sa8775p/cdsp1.mbn";
+	status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+	firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+	status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+	firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+	status = "okay";
+};
+
 &uart10 {
 	compatible = "qcom,geni-debug-uart";
 	pinctrl-0 = <&qup_uart10_default>;

-- 
2.43.0