RE: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface

[Selvamani Rajagopal]

Parthiban/Andrew,

Couple of requests / suggestions after completing the integration of our drivers to the current framework.

1) Can we move memory map selector definitions (OA_TC6_PHY_C45_PCS_MMS2 and other 4 definitions) to the header file
     include/linux/oa_tc6.h?
     Also, if possible, could we add the MMS0, MMS1?. Our driver is using them. Of course, we could add it when we submit our driver.

2) If it not too late to ask, Is it possible to move interrupt handler to vendor's code? ( oa_tc6_macphy_isr ). Instead, we could provide a function
    oa_tc6_wakeup(priv->oa_tc6) in oa_tc6.c, so that vendors' ISR code can use them to notify the  work queue tc6->spi_wq.
    This way, it will provide vendors' code an ability to deal with some of the interrupts. For example, our code deals with PHYINT bit. In the current
    framework, interrupts are handled in the common framework (oa_tc6.c) and status bits are cleared there.

    I believe that change would require vendors to call "request_irq", which should be OK.

Sincerely
Selva

> -----Original Message-----
> From: Parthiban.Veerasooran@xxxxxxxxxxxxx
> <Parthiban.Veerasooran@xxxxxxxxxxxxx>
> Sent: Sunday, June 2, 2024 11:56 PM
> To: Piergiorgio Beruto <Pier.Beruto@xxxxxxxxxx>; andrew@xxxxxxx
> Cc: Selvamani Rajagopal <Selvamani.Rajagopal@xxxxxxxxxx>;
> davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx; kuba@xxxxxxxxxx;
> pabeni@xxxxxxxxxx; horms@xxxxxxxxxx; saeedm@xxxxxxxxxx;
> anthony.l.nguyen@xxxxxxxxx; netdev@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; corbet@xxxxxxx; linux-doc@xxxxxxxxxxxxxxx;
> robh+dt@xxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx;
> conor+dt@xxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> Horatiu.Vultur@xxxxxxxxxxxxx; ruanjinjie@xxxxxxxxxx;
> Steen.Hegelund@xxxxxxxxxxxxx; vladimir.oltean@xxxxxxx;
> UNGLinuxDriver@xxxxxxxxxxxxx;
> Thorsten.Kummermehr@xxxxxxxxxxxxx;
> Nicolas.Ferre@xxxxxxxxxxxxx;
> benjamin.bigler@xxxxxxxxxxxxxxxxxxxxx; Viliam Vozar
> <Viliam.Vozar@xxxxxxxxxx>; Arndt Schuebel
> <Arndt.Schuebel@xxxxxxxxxx>
> Subject: Re: [PATCH net-next v4 00/12] Add support for OPEN Alliance
> 10BASE-T1x MACPHY Serial Interface
> 
> [External Email]: This email arrived from an external source - Please
> exercise caution when opening any attachments or clicking on links.
> 
> Hi Piergiorgio,
> 
> On 31/05/24 8:43 pm, Piergiorgio Beruto wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
> >
> > Hi Andrew,
> > We're currently working on re-factoring our driver onto the
> framework.
> > I will make sure we can give you a feedback ASAP.
> >
> > We're also trying to asses the performance difference between what
> we have now and what we can achieve after re-factorng.
> That's cool. As Andrew commented in the other email, let me know the
> feedback if you have any to be addressed in the v5 patch series to
> support the basic communication.
> 
> Best regards,
> Parthiban V
> >
> > Thanks,
> > Piergiorgio
> >
> > -----Original Message-----
> > From: Andrew Lunn <andrew@xxxxxxx>
> > Sent: 31 May, 2024 14:37
> > To: Parthiban.Veerasooran@xxxxxxxxxxxxx
> > Cc: Piergiorgio Beruto <Pier.Beruto@xxxxxxxxxx>; Selvamani
> Rajagopal <Selvamani.Rajagopal@xxxxxxxxxx>;
> davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx; kuba@xxxxxxxxxx;
> pabeni@xxxxxxxxxx; horms@xxxxxxxxxx; saeedm@xxxxxxxxxx;
> anthony.l.nguyen@xxxxxxxxx; netdev@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; corbet@xxxxxxx; linux-doc@xxxxxxxxxxxxxxx;
> robh+dt@xxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx;
> conor+dt@xxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> Horatiu.Vultur@xxxxxxxxxxxxx; ruanjinjie@xxxxxxxxxx;
> Steen.Hegelund@xxxxxxxxxxxxx; vladimir.oltean@xxxxxxx;
> UNGLinuxDriver@xxxxxxxxxxxxx;
> Thorsten.Kummermehr@xxxxxxxxxxxxx;
> Nicolas.Ferre@xxxxxxxxxxxxx;
> benjamin.bigler@xxxxxxxxxxxxxxxxxxxxx; Viliam Vozar
> <Viliam.Vozar@xxxxxxxxxx>; Arndt Schuebel
> <Arndt.Schuebel@xxxxxxxxxx>
> > Subject: Re: [PATCH net-next v4 00/12] Add support for OPEN
> Alliance 10BASE-T1x MACPHY Serial Interface
> >
> > [External Email]: This email arrived from an external source - Please
> exercise caution when opening any attachments or clicking on links.
> >
> >> So I would request all of you to give your comments on the existing
> >> implementation in the patch series to improve better. Once this
> >> version is mainlined we will discuss further to implement further
> >> features supported. I feel the current discussion doesn't have any
> >> impact on the existing implementation which supports basic 10Base-
> T1S
> >> Ethernet communication.
> >
> > Agreed. Lets focus on what we have now.
> >
> >
> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%
> 2Furldefense.com%2Fv3%2F__https%3A%2F%2Fpatchwork.kernel.org
> %2Fproject%2Fnetdevbpf%2Fpatch%2F20240418125648.372526-2-
> Parthiban.Veerasooran%40microchip.com%2F__%3B!!KkVubWw!n9Q
> OIA72sKA9z72UFogHeBRnA8Hse9gmIqzNv27f7Tc-
> 4dYH1KA__DfMSmln-uBotO-
> bnw3PC2qXbfRn%24&data=05%7C02%7CSelvamani.Rajagopal%40on
> semi.com%7Cc9784216cb1143af435408dc839a3822%7C04e1674b7
> af54d13a08264fc6e42384c%7C1%7C0%7C638529945611367664%7
> CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2lu
> MzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=eT
> wuSpyx1KIPuOXV3krpjqElcbhU0zBoTmPjj0srUTs%3D&reserved=0
> >
> > Version 4 failed to apply. So we are missing all the CI tests. We need a
> v5 which cleanly applies to net-next in order for those tests to run.
> >
> > I think we should disable vendor interrupts by default, since we
> currently have no way to handle them.
> >
> > I had a quick look at the comments on the patches. I don't think we
> have any other big issues not agreed on. So please post a v5 with them
> all addressed and we will see what the CI says.
> >
> > Piergiorgio, if you have any real problems getting basic support for
> your device working with this framework, now would be a good time to
> raise the problems.
> >
> >          Andrew