Re: [PATCH net V3 3/3] net: phy: mxl-gpy: Remove interrupt mask clearing from config_init

[Raju Lakkaraju]

Hi Wojciech,

The 06/05/2024 13:24, Wojciech Drewek wrote:
> [Some people who received this message don't often get email from wojciech.drewek@xxxxxxxxx. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
> 
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On 05.06.2024 12:16, Raju Lakkaraju wrote:
> > When the system resumes from sleep, the phy_init_hw() function invokes
> > config_init(), which clears all interrupt masks and causes wake events to be
> > lost in subsequent wake sequences. Remove interrupt mask clearing from
> > config_init() and preserve relevant masks in config_intr()
> >
> > Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
> > Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@xxxxxxxxxxxxx>
> > ---
> 
> One nit, other than that:
> Reviewed-by: Wojciech Drewek <wojciech.drewek@xxxxxxxxx>
> 
> > Change List:
> > ------------
> > V0 -> V3:
> >   - Address the https://lore.kernel.org/lkml/4a565d54-f468-4e32-8a2c-102c1203f72c@xxxxxxx/T/
> >     review comments
> >
> >  drivers/net/phy/mxl-gpy.c | 58 +++++++++++++++++++++++++--------------
> >  1 file changed, 38 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
> > index b2d36a3a96f1..e5f8ac4b4604 100644
> > --- a/drivers/net/phy/mxl-gpy.c
> > +++ b/drivers/net/phy/mxl-gpy.c
> > @@ -107,6 +107,7 @@ struct gpy_priv {
> >
> >       u8 fw_major;
> >       u8 fw_minor;
> > +     u32 wolopts;
> >
> >       /* It takes 3 seconds to fully switch out of loopback mode before
> >        * it can safely re-enter loopback mode. Record the time when
> > @@ -221,6 +222,15 @@ static int gpy_hwmon_register(struct phy_device *phydev)
> >  }
> >  #endif
> >
> > +static int gpy_ack_interrupt(struct phy_device *phydev)
> > +{
> > +     int ret;
> > +
> > +     /* Clear all pending interrupts */
> > +     ret = phy_read(phydev, PHY_ISTAT);
> > +     return ret < 0 ? ret : 0;
> 
> Can we just return phy_read?
> 

No.
PHY_ISTAT (i.e.16 bit) is Max Linear's GPY211 PHY interrupt status register.
These bits are ROSC (i.e. "Read Only, Self-Clearing) bits.
Read Status gives us the interrupts details
Any negative number is indicate the error in accessing PHY registgers. 
Return either success (i.e. 0) or Error ( < 0)

> > +}
> > +
> >  static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
> >  {
> >       struct gpy_priv *priv = phydev->priv;
> > @@ -262,16 +272,8 @@ static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
> >

-- 
Thanks,                                                                         
Raju