Re: [RFC PATCH 3/4] dt-bindings: mmc: renesas,sdhi: Document RZ/V2H(P) support

From: Lad, Prabhakar
Date: Thu Jun 06 2024 - 05:17:15 EST


Hi Rob,

Thank you for the review.

On Thu, Jun 6, 2024 at 1:26 AM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Wed, Jun 05, 2024 at 08:49:35AM +0100, Prabhakar wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> >
> > The SD/MMC block on the RZ/V2H(P) ("R9A09G057") SoC is similar to that
> > of the R-Car Gen3, but it has some differences:
> > - HS400 is not supported.
> > - It supports the SD_IOVS bit to control the IO voltage level.
> > - It supports fixed address mode.
> >
> > To accommodate these differences, a SoC-specific 'renesas,sdhi-r9a09g057'
> > compatible string is added.
> >
> > A "vqmmc-r9a09g057-regulator" regulator object is added to handle the
> > voltage level switch of the SD/MMC pins.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/mmc/renesas,sdhi.yaml | 20 ++++++++++++++++++-
> > 1 file changed, 19 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> > index 3d0e61e59856..154f5767cf03 100644
> > --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> > +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> > @@ -18,6 +18,7 @@ properties:
> > - renesas,sdhi-r7s9210 # SH-Mobile AG5
> > - renesas,sdhi-r8a73a4 # R-Mobile APE6
> > - renesas,sdhi-r8a7740 # R-Mobile A1
> > + - renesas,sdhi-r9a09g057 # RZ/V2H(P)
> > - renesas,sdhi-sh73a0 # R-Mobile APE6
> > - items:
> > - enum:
> > @@ -118,7 +119,9 @@ allOf:
> > properties:
> > compatible:
> > contains:
> > - const: renesas,rzg2l-sdhi
> > + enum:
> > + - renesas,sdhi-r9a09g057
> > + - renesas,rzg2l-sdhi
> > then:
> > properties:
> > clocks:
> > @@ -204,6 +207,21 @@ allOf:
> > sectioned off to be run by a separate second clock source to allow
> > the main core clock to be turned off to save power.
> >
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: renesas,sdhi-r9a09g057
> > + then:
> > + properties:
> > + vqmmc-r9a09g057-regulator:
>
> The node is already conditional on the compatible, so why the chip name?
> Then it doesn't work when the 2nd chip needs this.
>
Are you suggesting to use a generic name "vqmmc-regulator"?

Currently depending on the compat value "vqmmc-r9a09g057-regulator" in
the driver the corresponding OF data is populated. In future if a
different chip needs a regulator which varies slightly to the
r9a09g057 chip this will have to have a different OF data. Hence I
added the chip name in the regulator.

Cheers,
Prabhakar