Re: [PATCH 1/2] usb: typec-mux: ptn36502: broadcast typec state to next mux

From: Neil Armstrong
Date: Thu Jun 06 2024 - 08:53:30 EST


On 27/05/2024 11:16, Dmitry Baryshkov wrote:
On Mon, May 27, 2024 at 09:45:29AM +0200, Neil Armstrong wrote:
In the Type-C graph, the ptn36502 retimer is in between the USB-C
connector and the USB3/DP combo PHY, and this PHY also requires the
USB-C mode events to properly set-up the SuperSpeed Lanes functions
to setup USB3-only, USB3 + DP Altmode or DP Altmode only on the 4 lanes.

Update the ptn36502 retimer to get an optional type-c mux on the next
endpoint, and broadcast the received mode to it.

Tested-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>

--

Reported Tested by Luca in [1]

[1] https://lore.kernel.org/all/D1HOCBW6RG72.1B2RKGKW2Q5VC@xxxxxxxxxxxxx/
---
drivers/usb/typec/mux/ptn36502.c | 33 ++++++++++++++++++++++++++++++---
1 file changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/typec/mux/ptn36502.c b/drivers/usb/typec/mux/ptn36502.c
index 0ec86ef32a87..129d9d24b932 100644
--- a/drivers/usb/typec/mux/ptn36502.c
+++ b/drivers/usb/typec/mux/ptn36502.c
@@ -67,6 +67,7 @@ struct ptn36502 {
struct typec_retimer *retimer;
struct typec_switch *typec_switch;
+ struct typec_mux *typec_mux;
struct mutex lock; /* protect non-concurrent retimer & switch */
@@ -235,6 +236,7 @@ static int ptn36502_sw_set(struct typec_switch_dev *sw, enum typec_orientation o
static int ptn36502_retimer_set(struct typec_retimer *retimer, struct typec_retimer_state *state)
{
struct ptn36502 *ptn = typec_retimer_get_drvdata(retimer);
+ struct typec_mux_state mux_state;
int ret = 0;
mutex_lock(&ptn->lock);
@@ -252,7 +254,14 @@ static int ptn36502_retimer_set(struct typec_retimer *retimer, struct typec_reti
mutex_unlock(&ptn->lock);
- return ret;
+ if (ret)
+ return ret;
+
+ mux_state.alt = state->alt;
+ mux_state.data = state->data;
+ mux_state.mode = state->mode;
+
+ return typec_mux_set(ptn->typec_mux, &mux_state);
}
static int ptn36502_detect(struct ptn36502 *ptn)
@@ -321,9 +330,18 @@ static int ptn36502_probe(struct i2c_client *client)
return dev_err_probe(dev, PTR_ERR(ptn->typec_switch),
"Failed to acquire orientation-switch\n");
+ ptn->typec_mux = fwnode_typec_mux_get(dev->fwnode);
+ if (IS_ERR(ptn->typec_mux)) {
+ ret = dev_err_probe(dev, PTR_ERR(ptn->typec_mux),
+ "Failed to acquire mode-switch\n");
+ goto err_switch_put;
+ }
+
ret = regulator_enable(ptn->vdd18_supply);
- if (ret)
- return dev_err_probe(dev, ret, "Failed to enable vdd18\n");
+ if (ret) {
+ ret = dev_err_probe(dev, ret, "Failed to enable vdd18\n");
+ goto err_mux_put;
+ }
ret = ptn36502_detect(ptn);
if (ret)
@@ -363,6 +381,12 @@ static int ptn36502_probe(struct i2c_client *client)
err_disable_regulator:
regulator_disable(ptn->vdd18_supply);
+err_mux_put:
+ typec_mux_put(ptn->typec_mux);
+
+err_switch_put:
+ typec_switch_put(ptn->typec_switch);

Please split typec_switch_put() to a separate patch, it's a fix.

I was lazy, I'll do that,

Thanks


+
return ret;
}
@@ -374,6 +398,9 @@ static void ptn36502_remove(struct i2c_client *client)
typec_switch_unregister(ptn->sw);
regulator_disable(ptn->vdd18_supply);
+
+ typec_mux_put(ptn->typec_mux);
+ typec_switch_put(ptn->typec_switch);
}
static const struct i2c_device_id ptn36502_table[] = {

--
2.34.1