[PATCH v1 6/6] leds: spi-byte: Move OF ID table closer to their user

[Andy Shevchenko]

There is no code that uses ID table directly, except the
struct device_driver at the end of the file. Hence, move
table closer to its user. It's always possible to access
them via a pointer.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/leds/leds-spi-byte.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/leds/leds-spi-byte.c b/drivers/leds/leds-spi-byte.c
index 985bbbed251b..d24d0ddf347c 100644
--- a/drivers/leds/leds-spi-byte.c
+++ b/drivers/leds/leds-spi-byte.c
@@ -56,13 +56,6 @@ static const struct spi_byte_chipdef ubnt_acb_spi_led_cdef = {
 	.max_value = 0x3F,
 };
 
-static const struct of_device_id spi_byte_dt_ids[] = {
-	{ .compatible = "ubnt,acb-spi-led", .data = &ubnt_acb_spi_led_cdef },
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, spi_byte_dt_ids);
-
 static int spi_byte_brightness_set_blocking(struct led_classdev *dev,
 					    enum led_brightness brightness)
 {
@@ -122,6 +115,12 @@ static int spi_byte_probe(struct spi_device *spi)
 	return devm_led_classdev_register_ext(dev, &led->ldev, &init_data);
 }
 
+static const struct of_device_id spi_byte_dt_ids[] = {
+	{ .compatible = "ubnt,acb-spi-led", .data = &ubnt_acb_spi_led_cdef },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spi_byte_dt_ids);
+
 static struct spi_driver spi_byte_driver = {
 	.probe		= spi_byte_probe,
 	.driver = {
-- 
2.43.0.rc1.1336.g36b5255a03ac