[PATCH 2/2] leds: rgb: leds-qcom-lpg: Fix line wrapping style issues
From: Anjelique Melendez
Date: Thu Jun 06 2024 - 20:58:35 EST
Fix line wrapping style issues introduced in previous patches.
Signed-off-by: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
---
drivers/leds/rgb/leds-qcom-lpg.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index e74b2ceed1c2..7c35b3ba09a3 100644
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -620,6 +620,7 @@ static void lpg_sdam_apply_lut_control(struct lpg_channel *chan)
u8 val = 0, conf = 0, lut_offset = 0;
unsigned int hi_pause, lo_pause;
struct lpg *lpg = chan->lpg;
+ u16 addr;
if (!chan->ramp_enabled || chan->pattern_lo_idx == chan->pattern_hi_idx)
return;
@@ -640,17 +641,23 @@ static void lpg_sdam_apply_lut_control(struct lpg_channel *chan)
lo_idx += lut_offset;
}
- nvmem_device_write(lpg_chan_sdam, SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset, 1, &val);
- nvmem_device_write(lpg_chan_sdam, SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset, 1, &conf);
- nvmem_device_write(lpg_chan_sdam, SDAM_END_INDEX_OFFSET + chan->sdam_offset, 1, &hi_idx);
- nvmem_device_write(lpg_chan_sdam, SDAM_START_INDEX_OFFSET + chan->sdam_offset, 1, &lo_idx);
+ addr = SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset;
+ nvmem_device_write(lpg_chan_sdam, addr, 1, &val);
+ addr = SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset;
+ nvmem_device_write(lpg_chan_sdam, addr, 1, &conf);
+ addr = SDAM_END_INDEX_OFFSET + chan->sdam_offset;
+ nvmem_device_write(lpg_chan_sdam, addr, 1, &hi_idx);
+ addr = SDAM_START_INDEX_OFFSET + chan->sdam_offset;
+ nvmem_device_write(lpg_chan_sdam, addr, 1, &lo_idx);
val = RAMP_STEP_DURATION(chan->ramp_tick_ms);
nvmem_device_write(lpg_chan_sdam, SDAM_REG_RAMP_STEP_DURATION, 1, &val);
if (lpg->lut_sdam) {
- nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_HI_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &hi_pause);
- nvmem_device_write(lpg_chan_sdam, SDAM_PAUSE_LO_MULTIPLIER_OFFSET + chan->sdam_offset, 1, &lo_pause);
+ addr = SDAM_PAUSE_HI_MULTIPLIER_OFFSET + chan->sdam_offset;
+ nvmem_device_write(lpg_chan_sdam, addr, 1, &hi_pause);
+ addr = SDAM_PAUSE_LO_MULTIPLIER_OFFSET + chan->sdam_offset;
+ nvmem_device_write(lpg_chan_sdam, addr, 1, &lo_pause);
}
}
--
2.34.1