[RFC PATCH mtd-utils 104/110] tests: ubifs_tools: fsck_tests: Add cycle_powercut+fsck test
From: Zhihao Cheng
Date: Fri Jun 07 2024 - 00:53:53 EST
Inject powercut while doing fsstress on mounted UBIFS, check the
consistency of UBIFS after fsck.
This testscase mainly makes sure that fsck.ubifs can make UBIFS
image be consistent in common stress cases and powercut cases.
Signed-off-by: Zhihao Cheng <chengzhihao1@xxxxxxxxxx>
---
.gitignore | 1 +
configure.ac | 3 +-
tests/ubifs_tools-tests/Makemodule.am | 3 +-
.../fsck_tests/cycle_powercut_mount_fsck.sh.in | 144 +++++++++++++++++++++
4 files changed, 149 insertions(+), 2 deletions(-)
create mode 100755 tests/ubifs_tools-tests/fsck_tests/cycle_powercut_mount_fsck.sh.in
diff --git a/.gitignore b/.gitignore
index ea99a614..1d150f7a 100644
--- a/.gitignore
+++ b/.gitignore
@@ -118,6 +118,7 @@ tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh
tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh
tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh
tests/ubifs_tools-tests/fsck_tests/cycle_corrupted_fsck_fault_inject.sh
+tests/ubifs_tools-tests/fsck_tests/cycle_powercut_mount_fsck.sh
#
# Files generated by autotools
diff --git a/configure.ac b/configure.ac
index ed8a5f12..1a7174a5 100644
--- a/configure.ac
+++ b/configure.ac
@@ -294,7 +294,8 @@ AC_CONFIG_FILES([tests/fs-tests/fs_help_all.sh
tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh
tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh
tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh
- tests/ubifs_tools-tests/fsck_tests/cycle_corrupted_fsck_fault_inject.sh])
+ tests/ubifs_tools-tests/fsck_tests/cycle_corrupted_fsck_fault_inject.sh
+ tests/ubifs_tools-tests/fsck_tests/cycle_powercut_mount_fsck.sh])
AC_OUTPUT([Makefile])
diff --git a/tests/ubifs_tools-tests/Makemodule.am b/tests/ubifs_tools-tests/Makemodule.am
index 932a2bcb..2c190e2b 100644
--- a/tests/ubifs_tools-tests/Makemodule.am
+++ b/tests/ubifs_tools-tests/Makemodule.am
@@ -3,4 +3,5 @@ test_SCRIPTS += \
tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh \
tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh \
tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh \
- tests/ubifs_tools-tests/fsck_tests/cycle_corrupted_fsck_fault_inject.sh
+ tests/ubifs_tools-tests/fsck_tests/cycle_corrupted_fsck_fault_inject.sh \
+ tests/ubifs_tools-tests/fsck_tests/cycle_powercut_mount_fsck.sh
diff --git a/tests/ubifs_tools-tests/fsck_tests/cycle_powercut_mount_fsck.sh.in b/tests/ubifs_tools-tests/fsck_tests/cycle_powercut_mount_fsck.sh.in
new file mode 100755
index 00000000..fac5a033
--- /dev/null
+++ b/tests/ubifs_tools-tests/fsck_tests/cycle_powercut_mount_fsck.sh.in
@@ -0,0 +1,144 @@
+#!/bin/sh
+# Copyright (c), 2024, Huawei Technologies Co, Ltd.
+# Author: Zhihao Cheng <chengzhihao1@xxxxxxxxxx>
+#
+# Test Description:
+# Do many cycles of mount/fsstress/powercut/umount/fsck/mount, check whether
+# mount is successful.
+# Running time: 9h
+
+TESTBINDIR=@TESTBINDIR@
+source $TESTBINDIR/common.sh
+
+ID="0x20,0xa7,0x00,0x26" # 4G 256KB 4KB 2KB-sub-page
+
+function run_test()
+{
+ local encryption=$1
+
+ echo "Do cycle mount+powercut+fsck+umount($encryption) test"
+ modprobe nandsim id_bytes=$ID
+ mtdnum="$(find_mtd_device "$nandsim_patt")"
+ flash_eraseall /dev/mtd$mtdnum
+
+ dmesg -c > /dev/null
+
+ modprobe ubi mtd="$mtdnum,4096" || fatal "modprobe ubi fail"
+ ubimkvol -N vol_test -m -n 0 /dev/ubi$UBI_NUM || fatal "mkvol fail"
+ modprobe ubifs || fatal "modprobe ubifs fail"
+
+ if [[ "$encryption" == "encrypted" ]]; then
+ encryption_gen_key
+ fi
+
+ round=0
+ while [[ $round -lt 60 ]]
+ do
+ echo "---------------------- ROUND $round ----------------------"
+ let round=$round+1
+
+ mount_ubifs $DEV $MNT || fatal "mount ubifs fail"
+ if [[ "$encryption" == "encrypted" ]]; then
+ encryption_set_key $MNT
+ fi
+
+ if [[ $(($round % 30)) == 0 ]]
+ then
+ echo "Clean files"
+ rm -rf $MNT/*
+ check_err_msg
+ fi
+
+ fsstress -d $MNT -l0 -p4 -n10000 &
+ sleep $((RANDOM % 30))
+
+ per=`df -Th | grep ubifs | awk '{print $6}'`;
+ if [[ ${per%?} -gt 95 ]]; then
+ dmesg -c > /dev/null # The ENOSPC error messages may exist
+ else
+ check_err_msg # Make sure new operations are okay after fsck
+ fi
+ powercut
+
+ ps -e | grep -w fsstress > /dev/null 2>&1
+ while [ $? -eq 0 ]
+ do
+ killall -9 fsstress > /dev/null 2>&1
+ sleep 1
+ ps -e | grep -w fsstress > /dev/null 2>&1
+ done
+
+ while true
+ do
+ res=`mount | grep "$MNT"`
+ if [[ "$res" == "" ]]
+ then
+ break;
+ fi
+ umount $MNT
+ sleep 0.1
+ done
+
+ fsck.ubifs -a $DEV 2>&1 > $LOG_FILE
+ res=$?
+ cat $LOG_FILE
+ if [[ $res != $FSCK_OK ]]
+ then
+ # Powercut during layout_leb_in_gaps may change index
+ # LEBs without updating LPT.
+ log=`cat $LOG_FILE | grep "Inconsistent properties" | grep "is_idx 1"`
+ if [[ "$log" == "" ]]; then
+ fatal "fsck fail $res"
+ fi
+ if [[ $res != $FSCK_NONDESTRUCT ]]; then
+ fatal "fsck fail $res"
+ fi
+ fi
+
+ dmesg -c > /dev/null # powercut could reproduce error messages
+
+ enable_chkfs
+
+ mount_ubifs $DEV $MNT "noauthentication" "noatime"
+ res=$?
+ if [[ $res != 0 ]]
+ then
+ fatal "mount fail $res"
+ fi
+
+ if [[ "$encryption" == "encrypted" ]]; then
+ encryption_set_key $MNT
+ fi
+
+ du -sh $MNT > /dev/null # Make sure all files are accessible
+ ret=$?
+ if [[ $ret != 0 ]]; then
+ fatal "Cannot access all files"
+ fi
+ check_err_msg
+
+ umount $MNT
+ res=$?
+ if [[ $res != 0 ]]
+ then
+ fatal "unmount fail $res"
+ fi
+
+ check_err_msg
+
+ disable_chkfs
+ done
+
+ modprobe -r ubifs
+ modprobe -r ubi
+ modprobe -r nandsim
+}
+
+check_fsstress
+start_t=$(date +%s)
+run_test "encrypted"
+run_test "noencrypted"
+end_t=$(date +%s)
+time_cost=$(( end_t - start_t ))
+echo "Success, cost $time_cost seconds"
+exit 0
--
2.13.6