[PATCH] usb: typec: ucsi: don't retrieve PDOs if not supported

From: Mark Pearson
Date: Sun Jun 09 2024 - 17:43:58 EST


On systems where the UCSI PDOs are not supported, the UCSI driver is
giving an error message. This can cause users to believe there is a HW
issue with their system when in fact it is working as designed.

Check if PDO_DETAILS are supported as a feature before attempting to
access PDO. If not supported return that zero PDOs are available.

Tested on Lenovo L14 G5 AMD and confirmed with Lenovo FW team that PDOs
are not supported on this platform.

Suggested-by: Diogo Ivo <diogo.ivo@xxxxxxxxxxx>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Mark Pearson <mpearson-lenovo@xxxxxxxxx>
---
Note this patch replaces my previous submission 'treat get_pdos not supported
condition as info instead of error', based on feedback from review.

drivers/usb/typec/ucsi/ucsi.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index cb52e7b0a2c5..cadea8d328ed 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -641,9 +641,13 @@ static int ucsi_read_pdos(struct ucsi_connector *con,
static int ucsi_get_pdos(struct ucsi_connector *con, enum typec_role role,
int is_partner, u32 *pdos)
{
+ struct ucsi *ucsi = con->ucsi;
u8 num_pdos;
int ret;

+ if (!(ucsi->cap.features & UCSI_CAP_PDO_DETAILS))
+ return 0;
+
/* UCSI max payload means only getting at most 4 PDOs at a time */
ret = ucsi_read_pdos(con, role, is_partner, pdos, 0, UCSI_MAX_PDOS);
if (ret < 0)
--
2.45.1