[PATCH v1] arm64: dts: freescale: imx8mp-verdin: add HDMI support

From: Francesco Dolcini
Date: Mon Jun 10 2024 - 10:19:48 EST


From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>

Enable HDMI output on Verdin iMX8MP on all the supported carrier boards
(dev, dahlia, mallow and yavia).

HDMI DDC I2C is used in regular I2C mode, see link on the related
dt-bindings patch.

Fix CEC and HPD pinctrl, having a pull-down on HPD and a pull-up on CEC.

Link: https://lore.kernel.org/all/20240515062753.111746-1-marex@xxxxxxx/
Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
---
.../dts/freescale/imx8mp-verdin-dahlia.dtsi | 37 +++++++++++++++++++
.../boot/dts/freescale/imx8mp-verdin-dev.dtsi | 37 +++++++++++++++++++
.../dts/freescale/imx8mp-verdin-mallow.dtsi | 37 +++++++++++++++++++
.../dts/freescale/imx8mp-verdin-nonwifi.dtsi | 3 +-
.../dts/freescale/imx8mp-verdin-wifi.dtsi | 3 +-
.../dts/freescale/imx8mp-verdin-yavia.dtsi | 37 +++++++++++++++++++
.../boot/dts/freescale/imx8mp-verdin.dtsi | 13 +++++--
7 files changed, 160 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
index 6e6b9c2c4640..fbcd93e33aea 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -4,6 +4,18 @@
*/

/ {
+ native-hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "X21";
+ type = "a";
+
+ port {
+ native_hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,bitclock-master = <&codec_dai>;
@@ -94,6 +106,27 @@ &gpio4 {
pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
};

+/* Verdin HDMI_1 */
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&native_hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
/* Current measurement into module VCC */
&hwmon {
status = "okay";
@@ -139,6 +172,10 @@ &i2c5 {
status = "okay";
};

+&lcdif3 {
+ status = "okay";
+};
+
/* Verdin PCIE_1 */
&pcie {
vpcie-supply = <&reg_pcie>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
index 42ed44a11711..09733fea036d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
@@ -4,6 +4,18 @@
*/

/ {
+ native-hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "X37";
+ type = "a";
+
+ port {
+ native_hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
reg_eth2phy: regulator-eth2phy {
compatible = "regulator-fixed";
enable-active-high;
@@ -103,6 +115,27 @@ &gpio_expander_21 {
vcc-supply = <&reg_1p8v>;
};

+/* Verdin HDMI_1 */
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&native_hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
/* Current measurement into module VCC */
&hwmon {
status = "okay";
@@ -141,6 +174,10 @@ &i2c5 {
status = "okay";
};

+&lcdif3 {
+ status = "okay";
+};
+
/* Verdin PCIE_1 */
&pcie {
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
index 1d15f7449c58..3a40338cf2d8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
@@ -11,6 +11,18 @@
#include <dt-bindings/leds/common.h>

/ {
+ native-hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "X14";
+ type = "a";
+
+ port {
+ native_hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -91,6 +103,27 @@ &flexcan2 {
status = "okay";
};

+/* Verdin HDMI_1 */
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&native_hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
/* Temperature sensor on Mallow */
&hwmon_temp {
compatible = "ti,tmp1075";
@@ -117,6 +150,10 @@ &i2c5 {
status = "okay";
};

+&lcdif3 {
+ status = "okay";
+};
+
/* Verdin PCIE_1 */
&pcie {
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
index 91d597391b7c..2ee91f31e7f0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
@@ -41,8 +41,7 @@ &iomuxc {
pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
<&pinctrl_gpio3>, <&pinctrl_gpio4>,
<&pinctrl_gpio7>, <&pinctrl_gpio8>,
- <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
- <&pinctrl_hdmi_hog>;
+ <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>;
};

/*
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
index ef94f9a57e20..efcab00c0142 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
@@ -55,8 +55,7 @@ &iomuxc {
pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
<&pinctrl_gpio3>, <&pinctrl_gpio4>,
<&pinctrl_gpio7>, <&pinctrl_gpio8>,
- <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>,
- <&pinctrl_hdmi_hog>;
+ <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>;
};

/* On-module Bluetooth */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
index a7b261ff3e4c..533b7fe218ce 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
@@ -6,6 +6,18 @@
#include <dt-bindings/leds/common.h>

/ {
+ native-hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "J15";
+ type = "a";
+
+ port {
+ native_hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
/* Carrier Board Supply +V1.8 */
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
@@ -105,6 +117,27 @@ &gpio4 {
pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
};

+/* Verdin HDMI_1 */
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&native_hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
&hwmon_temp {
status = "okay";
};
@@ -127,6 +160,10 @@ &i2c5 {
status = "okay";
};

+&lcdif3 {
+ status = "okay";
+};
+
/* Verdin PCIE_1 */
&pcie {
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index aef4bef4bccd..834236db86fe 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -457,6 +457,13 @@ &gpio4 {
"SODIMM_44";
};

+/* Verdin HDMI_1 */
+&hdmi_tx {
+ ddc-i2c-bus = <&i2c5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+};
+
/* On-module I2C */
&i2c1 {
clock-frequency = <400000>;
@@ -1117,10 +1124,10 @@ pinctrl_gpio_keys: gpiokeysgrp {
<MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x1c4>; /* SODIMM 252 */
};

- pinctrl_hdmi_hog: hdmihoggrp {
+ pinctrl_hdmi: hdmigrp {
fsl,pins =
- <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000019>, /* SODIMM 63 */
- <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000019>; /* SODIMM 61 */
+ <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x140>, /* SODIMM 63 */
+ <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x180>; /* SODIMM 61 */
};

/* On-module I2C */
--
2.39.2