[PATCH] ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked up

[Richard Fitzgerald]

If the ASP1 DAI is hooked up by the machine driver the ASP TX mixer
sources should be initialized to disconnected.

The silicon default is for the mixer source registers to default to
a collection of monitoring sources. The problem with this is that it
causes the DAPM graph to initialize with the capture path connected
to a valid source widget, even though nothing setup a path. When the
ASP DAI is connected as a codec-to-codec link this will cause the other
codec to power-up even though nothing is using it.

Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
Fixes: dfd2ffb37399 ("ASoC: cs35l56: Prevent overwriting firmware ASP config")
---
 sound/soc/codecs/cs35l56-shared.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c
index 8af89a263594..30497152e02a 100644
--- a/sound/soc/codecs/cs35l56-shared.c
+++ b/sound/soc/codecs/cs35l56-shared.c
@@ -215,6 +215,10 @@ static const struct reg_sequence cs35l56_asp1_defaults[] = {
 	REG_SEQ0(CS35L56_ASP1_FRAME_CONTROL5,	0x00020100),
 	REG_SEQ0(CS35L56_ASP1_DATA_CONTROL1,	0x00000018),
 	REG_SEQ0(CS35L56_ASP1_DATA_CONTROL5,	0x00000018),
+	REG_SEQ0(CS35L56_ASP1TX1_INPUT,		0x00000000),
+	REG_SEQ0(CS35L56_ASP1TX2_INPUT,		0x00000000),
+	REG_SEQ0(CS35L56_ASP1TX3_INPUT,		0x00000000),
+	REG_SEQ0(CS35L56_ASP1TX4_INPUT,		0x00000000),
 };
 
 /*
-- 
2.39.2