Re: [PATCH v4 0/8] arm64: dts: convert fsl,esdhc.txt to yaml and fix layerscape dts warning

[Dragan Simic]

Hello Frank,

Please see my comment below.

On 2024-06-11 18:01, Frank Li wrote:
> Start from v4 because fsl.esdhc.txt to yaml already sent out as v3.
>
> Change from v3 to v4
> - Add dts warning fixes
> - Add mmc-spi-slot's voltage range fix, (not sure why it apply to
> layserscape's dts file.
> - clock-frequency is not required property
> - add dma-conherence: true in binding doc
>
> Now only "bit-endian" proptery warning left.
>
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
> Frank Li (8):
>       dt-bindings: mmc: Convert fsl-esdhc.txt to yaml
>       dt-bindings: mmc: mmc-spi-slot: Change voltage-ranges to 
> uint32-matrix
>       arm64: dts: ls1012a: Chang node name from 'esdhc' to 'mmc'
>       arm64: dts: ls1043a: Chang node name from 'esdhc' to 'mmc'
>       arm64: dts: ls1046a: Chang node name from 'esdhc' to 'mmc'
>       arm64: dts: ls1088a: Chang node name from 'esdhc' to 'mmc'
>       arm64: dts: ls208ax: Chang node name from 'esdhc' to 'mmc'
>       arm64: dts: lx2160a: Chang node name from 'esdhc' to 'mmc'

s/Chang /Change / -- in all patch subjects

>  .../devicetree/bindings/mmc/fsl,esdhc.yaml         | 105 
> +++++++++++++++++++++
>  .../devicetree/bindings/mmc/fsl-esdhc.txt          |  52 ----------
>  .../devicetree/bindings/mmc/mmc-spi-slot.yaml      |  17 ++--
>  arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi     |   4 +-
>  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi     |   2 +-
>  arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi     |   2 +-
>  arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi     |   2 +-
>  arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     |   2 +-
>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     |   8 +-
>  9 files changed, 125 insertions(+), 69 deletions(-)
> ---
> base-commit: d35b2284e966c0bef3e2182a5c5ea02177dd32e4
> change-id: 20240610-ls_waring_esdhc-93136a5dd794
>
> Best regards,
> ---
> Frank Li <Frank.Li@xxxxxxx>