Re: [PATCH next-next] net: phy: realtek: add support for rtl8224 2.5Gbps PHY

[Chris Packham]

+cc Eric W and Marek.

On 11/06/24 17:34, Chris Packham wrote:
> The Realtek RTL8224 PHY is a 2.5Gbps capable PHY. It only uses the
> clause 45 MDIO interface and can leverage the support that has already
> been added for the other 822x PHYs.
>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
>
> Notes:
>      I'm currently testing this on an older kernel because the board I'm
>      using has a SOC/DSA switch that has a driver in openwrt for Linux 5.15.
>      I have tried to selectively back port the bits I need from the other
>      rtl822x work so this should be all that is required for the rtl8224.
>      
>      There's quite a lot that would need forward porting get a working system
>      against a current kernel so hopefully this is small enough that it can
>      land while I'm trying to figure out how to untangle all the other bits.
>      
>      One thing that may appear lacking is the lack of rate_matching support.
>      According to the documentation I have know the interface used on the
>      RTL8224 is (q)uxsgmii so no rate matching is required. As I'm still
>      trying to get things completely working that may change if I get new
>      information.
>
>   drivers/net/phy/realtek.c | 8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> index 7ab41f95dae5..2174893c974f 100644
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -1317,6 +1317,14 @@ static struct phy_driver realtek_drvs[] = {
>   		.resume         = rtlgen_resume,
>   		.read_page      = rtl821x_read_page,
>   		.write_page     = rtl821x_write_page,
> +	}, {
> +		PHY_ID_MATCH_EXACT(0x001ccad0),
> +		.name		= "RTL8224 2.5Gbps PHY",
> +		.get_features   = rtl822x_c45_get_features,
> +		.config_aneg    = rtl822x_c45_config_aneg,
> +		.read_status    = rtl822x_c45_read_status,
> +		.suspend        = genphy_c45_pma_suspend,
> +		.resume         = rtlgen_c45_resume,
>   	}, {
>   		PHY_ID_MATCH_EXACT(0x001cc961),
>   		.name		= "RTL8366RB Gigabit Ethernet",