Re: [PATCH v8 12/17] PCI: hold the rescan mutex when scanning for the first time

[Bjorn Helgaas]

On Tue, May 28, 2024 at 09:03:20PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> 
> With the introduction of PCI device power control drivers that will be
> able to trigger the port rescan when probing, we need to hold the rescan
> mutex during the initial pci_host_probe() too or the two could get in
> each other's way.
> 
> Tested-by: Amit Pundir <amit.pundir@xxxxxxxxxx>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

With s/hold the/Hold the/ in subject to match history,

Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>

> ---
>  drivers/pci/probe.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 8e696e547565..604fc96b1098 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -3072,7 +3072,9 @@ int pci_host_probe(struct pci_host_bridge *bridge)
>  	struct pci_bus *bus, *child;
>  	int ret;
>  
> +	pci_lock_rescan_remove();
>  	ret = pci_scan_root_bus_bridge(bridge);
> +	pci_unlock_rescan_remove();
>  	if (ret < 0) {
>  		dev_err(bridge->dev.parent, "Scanning root bridge failed");
>  		return ret;
> 
> -- 
> 2.43.0
>