Re: [PATCH] arm64: dts: ti: k3-j722s-evm: Enable main_uart5

[Bhavya Kapoor]

Hi all, please ignore this patch as main_uart5 needs to be kept 
reserved. I will send another patch for the same

regards

On 28/05/24 4:38 pm, Bhavya Kapoor wrote:
> On 28/05/24 3:09 pm, Bhavya Kapoor wrote:
> > main_uart5 node defined in the SoC dtsi file is incomplete
> > and will not be functional unless it is extended with pinmux
> > information at board integration level.
> >
> > Thus, add pinmux for main_uart5 in the board dts file and
> > enable it to make it functional.
> >
> > Signed-off-by: Bhavya Kapoor <b-kapoor@xxxxxx>
> > ---
> Test Logs: 
> https://gist.github.com/a0498981/dc8b0cb670a5726eeb6c10f6de1f468e
> >   arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 16 ++++++++++++++++
> >   1 file changed, 16 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts 
> > b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> > index bf3c246d13d1..e3892a6f2fab 100644
> > --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> > +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> > @@ -18,6 +18,7 @@ / {
> >       aliases {
> >           serial0 = &wkup_uart0;
> >           serial2 = &main_uart0;
> > +        serial3 = &main_uart5;
> >           mmc0 = &sdhci0;
> >           mmc1 = &sdhci1;
> >       };
> > @@ -142,6 +143,14 @@ J722S_IOPAD(0x01cc, PIN_OUTPUT, 0)    /* (B22) 
> > UART0_TXD */
> >           bootph-all;
> >       };
> >   +    main_uart5_pins_default: main-uart5-default-pins {
> > +        pinctrl-single,pins = <
> > +            J722S_IOPAD(0x0108, PIN_INPUT, 3)    /* (J27) UART5_RXD */
> > +            J722S_IOPAD(0x010c, PIN_OUTPUT, 3)    /* (H27) UART5_TXD */
> > +        >;
> > +        bootph-all;
> > +    };
> > +
> >       vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
> >           pinctrl-single,pins = <
> >               J722S_IOPAD(0x0120, PIN_INPUT, 7) /* (F27) 
> > MMC2_CMD.GPIO0_70 */
> > @@ -240,6 +249,13 @@ &main_uart0 {
> >       bootph-all;
> >   };
> >   +&main_uart5 {
> > +    pinctrl-names = "default";
> > +    pinctrl-0 = <&main_uart5_pins_default>;
> > +    status = "okay";
> > +    bootph-all;
> > +};
> > +
> >   &mcu_pmx0 {
> >         wkup_uart0_pins_default: wkup-uart0-default-pins {