[PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SM4250 pinctrl
From: Srinivas Kandagatla
Date: Wed Jun 12 2024 - 07:56:35 EST
Add device tree binding Documentation details for Qualcomm SM4250 LPASS
LPI(Low power Island) pinctrl device.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
.../pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml | 119 +++++++++++++++++++++
1 file changed, 119 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml
new file mode 100644
index 000000000000..3968a363aa51
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM4250 SoC LPASS LPI TLMM
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
+
+description:
+ Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+ (LPASS) Low Power Island (LPI) of Qualcomm SM4250 SoC.
+
+properties:
+ compatible:
+ const: qcom,sm4250-lpass-lpi-pinctrl
+
+ reg:
+ maxItems: 2
+
+ clocks:
+ items:
+ - description: LPASS Audio voting clock
+
+ clock-names:
+ items:
+ - const: audio
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm4250-lpass-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm4250-lpass-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm4250-lpass-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|1[0-8])$"
+ minItems: 1
+ maxItems: 19
+
+ function:
+ enum: [ gpio, dmic01_clk, dmic01_data, dmic23_clk, dmic23_data,
+ dmic4_clk, dmic4_data, ext_mclk0_a, ext_mclk0_b, ext_mclk1_a,
+ ext_mclk1_b, ext_mclk1_c, i2s1_clk, i2s1_data, i2s1_ws,
+ i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws,
+ qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws, slim_clk, slim_data,
+ swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, swr_wsa_clk,
+ swr_wsa_data ]
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+allOf:
+ - $ref: qcom,lpass-lpi-common.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/sound/qcom,q6afe.h>
+ lpi_tlmm: pinctrl@a7c0000 {
+ compatible = "qcom,sm4250-lpass-lpi-pinctrl";
+ reg = <0xa7c0000 0x20000>,
+ <0xa950000 0x10000>;
+ clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "audio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpi_tlmm 0 0 19>;
+
+ i2s2-active-state {
+ clk-pins {
+ pins = "gpio10";
+ function = "i2s2_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio12";
+ function = "i2s2_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ };
+ };
+
+ i2s2-sleep-clk-state {
+ pins = "gpio10";
+ function = "i2s2_clk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
--
2.25.1