[PATCH 1/1] leds: core: Omit set_brightness error message for a LED supporting hw trigger only

[Lee Jones]

If both set_brightness functions return -ENOTSUPP, then the LED doesn't
support setting a fixed brightness value, and the error message isn't
helpful. This can be the case e.g. for LEDs supporting a specific hw
trigger only.

Pinched the subject line and commit message from Heiner:
Link: https://lore.kernel.org/all/44177e37-9512-4044-8991-bb23b184bf37@xxxxxxxxx/

Reworked the function to provide Heiner's required semantics whilst
simultaneously increasing readability and flow.

Cc: Pavel Machek <pavel@xxxxxx>
Cc: linux-leds@xxxxxxxxxxxxxxx
Suggested-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Signed-off-by: Lee Jones <lee@xxxxxxxxxx>
---
 drivers/leds/led-core.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
index ef7d1c6767ca..3b4db39f2326 100644
--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -123,15 +123,22 @@ static void led_timer_function(struct timer_list *t)
 static void set_brightness_delayed_set_brightness(struct led_classdev *led_cdev,
 						  unsigned int value)
 {
-	int ret = 0;
+	int ret;
 
 	ret = __led_set_brightness(led_cdev, value);
-	if (ret == -ENOTSUPP)
+	if (ret == -ENOTSUPP) {
 		ret = __led_set_brightness_blocking(led_cdev, value);
-	if (ret < 0 &&
-	    /* LED HW might have been unplugged, therefore don't warn */
-	    !(ret == -ENODEV && (led_cdev->flags & LED_UNREGISTERING) &&
-	    (led_cdev->flags & LED_HW_PLUGGABLE)))
+		if (ret == -ENOTSUPP)
+			/* No back-end support to set a fixed brightness value */
+			return;
+	}
+
+	/* LED HW might have been unplugged, therefore don't warn */
+	if (ret == -ENODEV && led_cdev->flags & LED_UNREGISTERING &&
+	    led_cdev->flags & LED_HW_PLUGGABLE)
+		return;
+
+	if (ret < 0)
 		dev_err(led_cdev->dev,
 			"Setting an LED's brightness failed (%d)\n", ret);
 }
-- 
2.45.2.505.gda0bf45e8d-goog