Re: [PATCH 3/6] dt-bindings: gpu: powervr-rogue: Add MediaTek MT8173 GPU

From: Chen-Yu Tsai
Date: Thu Jun 13 2024 - 05:11:05 EST


On Tue, Jun 4, 2024 at 12:18 PM Chen-Yu Tsai <wenst@xxxxxxxxxxxx> wrote:
>
> On Fri, May 31, 2024 at 9:37 PM Frank Binns <Frank.Binns@xxxxxxxxxx> wrote:
> >
> > Hi ChenYu,
> >
> > On Thu, 2024-05-30 at 16:35 +0800, Chen-Yu Tsai wrote:
> > > The MediaTek MT8173 comes with a PowerVR Rogue GX6250, which is one
> > > of the Series6XT GPUs, another sub-family of the Rogue family.
> >
> > I've added Adam Ford who sent out some DT related patches [1] for the Renesas
> > variant of GX6250 and the GX6650 (another Series6XT GPU).
> >
> > >
> > > This was part of the very first few versions of the PowerVR submission,
> > > but was later dropped. The compatible string has been updated to follow
> > > the new naming scheme adopted for the AXE series.
> > >
> > > In a previous iteration of the PowerVR binding submission [1], the
> > > number of clocks required for the 6XT family was mentioned to be
> > > always 3. This is also reflected here.
> > >
> > > [1] https://lore.kernel.org/dri-devel/6eeccb26e09aad67fb30ffcd523c793a43c79c2a.camel@xxxxxxxxxx/
> > >
> > > Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
> > > ---
> > > .../bindings/gpu/img,powervr-rogue.yaml | 24 +++++++++++++++----
> > > 1 file changed, 20 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
> > > index 256e252f8087..48aa205b66b4 100644
> > > --- a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
> > > +++ b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
> > > @@ -12,10 +12,17 @@ maintainers:
> > >
> > > properties:
> > > compatible:
> > > - items:
> > > - - enum:
> > > - - ti,am62-gpu
> > > - - const: img,img-axe # IMG AXE GPU model/revision is fully discoverable
> > > + oneOf:
> > > + - items:
> > > + - enum:
> > > + - mediatek,mt8173-gpu
> > > + # PowerVR 6XT GPU model/revision is fully discoverable
> > > + - const: img,powervr-6xt
> > > + - items:
> > > + - enum:
> > > + - ti,am62-gpu
> > > + # IMG AXE GPU model/revision is fully discoverable
> > > + - const: img,img-axe
> >
> > The Series6XT GPU models have differing numbers of power domains (either 2, 4 or
> > 5). Whereas, the AXE GPUs have a single power domain, so I assume there should
> > be a related change here.
> >
> > The GX6250 has two power domains (lets call them A and B). There's a constraint
> > that if domain B is powered then domain A must also be powered.
> >
> > In patch 6 [2] it's setting the power domain to MT8173_POWER_DOMAIN_MFG, which I
> > believe corresponds to power domain B. I assume this works because the MTK power
> > controller driver is encoding the constraint above, meaning that when we disable
> > or enable MT8173_POWER_DOMAIN_MFG it's also disabling/enabling MT8173_POWER_DOMA
> > IN_MFG_2D (domain A).
>
> It could also be that the power domains are split in the glue layer and there
> is some sequencing handled there. I'll reach out to MediaTek to see if they
> can dig up some design specifics.

Unfortunately they said they no longer have that information.

> I assume you would like to see the separate power domains properly modeled
> in the device tree?

So how should we go about this? Adam, do you have this information for
your platform?

Thanks
ChenYu

>
> Thanks
> ChenYu
>
> > Thanks
> > Frank
> >
> > [1] https://lists.freedesktop.org/archives/dri-devel/2024-February/443548.html
> > [2] https://lists.freedesktop.org/archives/dri-devel/2024-May/455833.html
> >
> > >
> > > reg:
> > > maxItems: 1
> > > @@ -56,6 +63,15 @@ allOf:
> > > properties:
> > > clocks:
> > > maxItems: 1
> > > + - if:
> > > + properties:
> > > + compatible:
> > > + contains:
> > > + const: img,powervr-6xt
> > > + then:
> > > + properties:
> > > + clocks:
> > > + minItems: 3
> > >
> > > examples:
> > > - |